![]() |
350 block w/vortec heads
I have a 1998 350 2 bolt main with VORTEC heads I really need to get out of my way. I'll take $300 and that will get you the block, heads, valve covers, oil pan, push rods, roller lifters, rocker arms. Does not have a crank or cam. Was going to build 383 but changed my mind.
|
350 block/Vortech heads
Sent you a PM
|
do you still have this for sale?
|
yes
|
:whine: Why I gotta be on an island?!?!? Thats a deal I would grab in a heartbeat here!!:whine:
|
A little curious here. All 98 350's were vortec 350 motors. ALL vortec motors are 4bolt blocks. :confused: :confused:
|
1998 Vortec engine
Well buddy you're wrong on this one. This motor came out of a 1998 Chevrolet truck. I thought for sure it would be a 4 bolt, but when I pulled off the oil pan there were only 2 bolts on each main cap.
|
gldevall, i used to work for a GM dealer, and with all of the L31 blocks i have seen, all were 4 bolts. the service replacement for the block is PN: 10105123
Quote:
|
I'll get the number off of the block and post it. I'll also take a picture of it showing that is only a 2 bolt main.
Gary |
this is really interesting :)
kinda like those super rare 4bolt 305's |
Well, it may be a 305. But I was told it was a 350. Now you guys have me wondering what the hell kind of motor I have.
|
hmmm, never thought about that. It might be a 305. Just take a head off and check the bore size. If its under 4", its not a 350 ;)
|
Block Clarafication
OK guys, I finally found out what I have. I found a casting # on the top of the block near the rear and it is 10243880. It has a 4" bore and I looked up the casting # and found the following.
MorTec.com "10243880...350...95-00...2 or 4...Vortec truck, Gen.I crate motors and "ZZ4", roller cam, one piece rear seal" I also took some pics of the block and the heads that I will post tomorrow. Any more questions? Just ask. Thanks to everyone, Gary |
hmm.. learn somethin new every day!!
|
yup yup, i've never seen a 2 bolt made after '92 or so.
|
pics
1 Attachment(s)
Here is a pic of the block.
|
pics
1 Attachment(s)
Here is a pic of the mains.
|
pics
1 Attachment(s)
And the heads
|
Yep, my '98 vortec 350 came out of a Z71 truck, 2bolt.
|
gldevall
How far are you from Beaumont? Do you still have the engine? |
Yes, I still have it and I'm about 3 hours from Beaumont down I-10.
|
TTT
All still available. Any takers?? Will sell separate. |
how much you want for the heads?
|
what kind of shape is it in? i would love to take it off your hands but i'm eight hours away.
|
I think the 1st $275 will get the heads.
|
All times are GMT -4. The time now is 07:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com