350 block w/vortec heads - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gldevall · 03-16-2003, 10:57 PM

I have a 1998 350 2 bolt main with VORTEC heads I really need to get out of my way. I'll take $300 and that will get you the block, heads, valve covers, oil pan, push rods, roller lifters, rocker arms. Does not have a crank or cam. Was going to build 383 but changed my mind.

44th Miss Inf · 03-17-2003, 01:22 AM

Sent you a PM

69c10stepside · 03-18-2003, 12:31 PM

do you still have this for sale?

gldevall · 03-18-2003, 02:11 PM

yes

navybear70 · 03-19-2003, 01:13 AM

Why I gotta be on an island?!?!? Thats a deal I would grab in a heartbeat here!!

Tom · 03-19-2003, 01:14 PM

A little curious here. All 98 350's were vortec 350 motors. ALL vortec motors are 4bolt blocks.

gldevall · 03-19-2003, 09:51 PM

Well buddy you're wrong on this one. This motor came out of a 1998 Chevrolet truck. I thought for sure it would be a 4 bolt, but when I pulled off the oil pan there were only 2 bolts on each main cap.

*1FaastC10* · 03-19-2003, 11:34 PM

gldevall, i used to work for a GM dealer, and with all of the L31 blocks i have seen, all were 4 bolts. the service replacement for the block is PN: 10105123

Quote:

GM Performance Parts Catalog:

This engine block is used in 1986-99 Gen I heavy-duty applications. It has 4.00" diameter cylinder boresand four-bolt main bearing caps. This block is machined for a one-piece rear crankshaft seal.

this is also the same part number as the factory replacement block that you will buy from a GM dealer.

gldevall · 03-20-2003, 09:54 AM

I'll get the number off of the block and post it. I'll also take a picture of it showing that is only a 2 bolt main.

Gary

Tom · 03-20-2003, 02:02 PM

this is really interesting

kinda like those super rare 4bolt 305's

gldevall · 03-20-2003, 02:31 PM

Well, it may be a 305. But I was told it was a 350. Now you guys have me wondering what the hell kind of motor I have.

Tom · 03-20-2003, 04:43 PM

hmmm, never thought about that. It might be a 305. Just take a head off and check the bore size. If its under 4", its not a 350

gldevall · 03-20-2003, 09:42 PM

OK guys, I finally found out what I have. I found a casting # on the top of the block near the rear and it is 10243880. It has a 4" bore and I looked up the casting # and found the following.

MorTec.com

"10243880...350...95-00...2 or 4...Vortec truck, Gen.I crate motors and "ZZ4", roller cam, one piece rear seal"

I also took some pics of the block and the heads that I will post tomorrow. Any more questions? Just ask.

Thanks to everyone,

Gary

love it loud · 03-20-2003, 10:26 PM

hmm.. learn somethin new every day!!

*1FaastC10* · 03-21-2003, 04:07 AM

yup yup, i've never seen a 2 bolt made after '92 or so.

gldevall · 03-21-2003, 10:54 AM

Here is a pic of the block.

gldevall · 03-21-2003, 10:56 AM

Here is a pic of the mains.

gldevall · 03-21-2003, 10:57 AM

And the heads

Blue68 · 03-21-2003, 04:18 PM

Yep, my '98 vortec 350 came out of a Z71 truck, 2bolt.

CRRoy71 · 03-23-2003, 12:33 AM

gldevall

How far are you from Beaumont?
Do you still have the engine?

gldevall · 03-23-2003, 06:12 PM

Yes, I still have it and I'm about 3 hours from Beaumont down I-10.

gldevall · 04-15-2003, 09:26 PM

TTT
All still available. Any takers?? Will sell separate.

73stepside · 04-15-2003, 11:20 PM

how much you want for the heads?

CT-Truckster · 04-16-2003, 01:45 AM

what kind of shape is it in? i would love to take it off your hands but i'm eight hours away.

gldevall · 04-16-2003, 08:19 AM

I think the 1st $275 will get the heads.

03-16-2003, 10:57 PM	#1
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	350 block w/vortec heads I have a 1998 350 2 bolt main with VORTEC heads I really need to get out of my way. I'll take $300 and that will get you the block, heads, valve covers, oil pan, push rods, roller lifters, rocker arms. Does not have a crank or cam. Was going to build 383 but changed my mind.

03-17-2003, 01:22 AM	#2
44th Miss Inf Registered User Join Date: Sep 2002 Location: Liberty, Mississippi Posts: 672	350 block/Vortech heads Sent you a PM

03-18-2003, 12:31 PM	#3
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	do you still have this for sale? __________________ 1989 GMC C1500 ECSB 1972 Gmc Jimmy 1972 Chevy C10 SWB Sold

03-18-2003, 02:11 PM	#4
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	yes __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

03-19-2003, 01:13 AM	#5
navybear70 hometown heroes! Join Date: Jan 2003 Location: Ewa Beach, HI Posts: 487	Why I gotta be on an island?!?!? Thats a deal I would grab in a heartbeat here!! __________________ 2009 Silverado 2wd, 121k as of 04APR13. I love my truck 29 days out of the month. The payment is due on the 30th... Do your duty in all things. You cannot do more, you should never wish to do less. -Robert E. Lee "Never give up ground you've already taken." -Unknown

03-19-2003, 01:14 PM	#6
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,735	A little curious here. All 98 350's were vortec 350 motors. ALL vortec motors are 4bolt blocks. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

03-19-2003, 09:51 PM	#7
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	1998 Vortec engine Well buddy you're wrong on this one. This motor came out of a 1998 Chevrolet truck. I thought for sure it would be a 4 bolt, but when I pulled off the oil pan there were only 2 bolts on each main cap. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

03-20-2003, 09:54 AM	#9
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	I'll get the number off of the block and post it. I'll also take a picture of it showing that is only a 2 bolt main. Gary __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

03-20-2003, 02:02 PM	#10
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,735	this is really interesting kinda like those super rare 4bolt 305's __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

03-20-2003, 02:31 PM	#11
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Well, it may be a 305. But I was told it was a 350. Now you guys have me wondering what the hell kind of motor I have. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels Last edited by gldevall; 03-20-2003 at 02:34 PM.

03-20-2003, 04:43 PM	#12
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,735	hmmm, never thought about that. It might be a 305. Just take a head off and check the bore size. If its under 4", its not a 350 __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

03-20-2003, 09:42 PM	#13
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Block Clarafication OK guys, I finally found out what I have. I found a casting # on the top of the block near the rear and it is 10243880. It has a 4" bore and I looked up the casting # and found the following. MorTec.com "10243880...350...95-00...2 or 4...Vortec truck, Gen.I crate motors and "ZZ4", roller cam, one piece rear seal" I also took some pics of the block and the heads that I will post tomorrow. Any more questions? Just ask. Thanks to everyone, Gary __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

03-20-2003, 10:26 PM	#14
love it loud Calibration Engineer Join Date: Oct 2002 Location: Windsor, Ontario, Canada Posts: 361	hmm.. learn somethin new every day!! __________________ CANADIAN CONNECTION

03-21-2003, 04:07 AM	#15
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	yup yup, i've never seen a 2 bolt made after '92 or so.

03-21-2003, 10:54 AM	#16
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	pics Here is a pic of the block. Attached Images __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels



Register or Log In To remove these advertisements.

03-21-2003, 10:56 AM	#17
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	pics Here is a pic of the mains. Attached Images __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

03-21-2003, 10:57 AM	#18
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	pics And the heads Attached Images __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

03-21-2003, 04:18 PM	#19
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	Yep, my '98 vortec 350 came out of a Z71 truck, 2bolt. __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

03-23-2003, 12:33 AM	#20
CRRoy71 Registered User Join Date: Feb 2003 Location: Mont Belvieu, TX Posts: 852	gldevall How far are you from Beaumont? Do you still have the engine? __________________ Chris '92 ext. cab s/b 4.3L "Sparky" '04 crew cab 2500 4x4 6.0L

03-23-2003, 06:12 PM	#21
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Yes, I still have it and I'm about 3 hours from Beaumont down I-10. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

04-15-2003, 09:26 PM	#22
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	TTT All still available. Any takers?? Will sell separate. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

04-15-2003, 11:20 PM	#23
73stepside Registered User Join Date: Feb 2002 Location: Moore OK 73160 Posts: 974	how much you want for the heads? __________________ 04 GMC Sierra RCSS 70 CST LWB 04 HD Sportster 1200 Custom

04-16-2003, 01:45 AM	#24
CT-Truckster ? Join Date: Jul 2002 Location: Dyersburg, TN Posts: 471	what kind of shape is it in? i would love to take it off your hands but i'm eight hours away.

04-16-2003, 08:19 AM	#25
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	I think the 1st $275 will get the heads. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

Register or Log In To remove these advertisements.