The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   steering column question (https://67-72chevytrucks.com/vboard/showthread.php?t=452000)

fleabrain 03-09-2011 08:25 PM
steering column question
 
Hi i'm new on here. I have a 66 c/10 daily driver (will be posting pics soon) and the three speed steering column is wearing out. I have access to a 63 column but i heard only 64-68 would work in a 66. Does anyone have any info on this?

DPowers 03-09-2011 08:27 PM
Re: steering column question
 
Don't know why it wouldn't

lakeroadster 03-09-2011 08:30 PM
Re: steering column question
 
Why not rebuild your column? You can get new upper and lower bearings and a new turn signal switch.

Captainfab 03-10-2011 01:01 AM
Re: steering column question
 
Welcome to the forum :D

The wiring plug on a '63 column is different than on the '64-'66's. Otherwise it will work.

Clyde65 03-10-2011 12:31 PM
Re: steering column question
 
Captn fab is very correct. If you are experiencing the shift lock up issue, then it may need more than just the upper and lower bearing.

fleabrain 03-10-2011 07:19 PM
Re: steering column question
 
Thanks guys. Yeah i can't shift out of first gear when the truck is moving. I decided just to buy a floor shifter. Mr gasket has them fairly cheap


All times are GMT -4. The time now is 02:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com