The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Rivets (https://67-72chevytrucks.com/vboard/showthread.php?t=452201)

Davedr

03-10-2011 09:17 PM

Rivets

Does anyone know a good place I can order rivets for a 70 c10 Grille? What size would I need? All info appreciated...Dave

Sinister

03-10-2011 10:03 PM

Re: Rivets

I used pop rivets from the hardware store.

hayhauler71

03-10-2011 10:10 PM

Re: Rivets

Quote:

Originally Posted by Sinister (Post 4544430)

I used pop rivets from the hardware store.

x2 on that statement

rob32472

03-10-2011 10:12 PM

Re: Rivets

beyond what the others have said check with most any of the board vendors they sell a grill hardware kit

LockDoc

03-10-2011 10:51 PM

Re: Rivets

-
If you use pop rivets make sure they are aluminum not steel...:)

LockDoc

Davedr

03-11-2011 01:15 AM

Re: Rivets

Thanks Everyone.. Dave

bobs409

03-11-2011 08:17 AM

Re: Rivets

I like the type that have a theaded shaft and nut. From the top they look like an original rivet but you can easily remove them and reinstall anytime if you had to. Pop rivets will have a hole on the top.

Lots of vendors sell them.

cdowns

03-11-2011 08:49 AM

Re: Rivets

i've found original type rivets at my local fastener store// i guess around here they are commonly used on aluminum screen enclosures and rooms

FRENCHBLUE72

03-11-2011 01:12 PM

Re: Rivets

I had a kit around here that I bought from wes at classic heartbeat but cant seem to find it right now..

All times are GMT -4. The time now is 07:35 AM.