will this work
 

i got a 87 no tbi just carb will this intake work on it or no if not what should i go withhttp://www.summitracing.com/parts/EDL-7501 thanks and what wires and plugs are you running

Re: will this work
 

Yep It should work. I run AC Delco plugs they work the best on chevy's do nut run bosh they are crap. Plug wires well just depends on what all mods you are doing.

Re: will this work
 

i just got everything stock i think has a mild cam headers that pretty much it so it should work then huh

Re: will this work
 

It should but there are guys on here allot smarter than me and if I was you I would wait on a second opinion before making any purchases.

Re: will this work
 

im going with this i think it should be good http://www.summitracing.com/parts/EDL-2604/

Re: will this work
 

Yep
http://s1210.photobucket.com/albums/...exasbigbear21/

Re: will this work
 

where did you find those valve covers

Re: will this work
 

http://www.summitracing.com/parts/SUM-G3309/
They are heavy duty to. The pic's of them on are on the photobucket link now.

Re: will this work
 

you suggest buying new bolts or no if so which ones should i buy

Re: will this work
 

This is the ones I got and yes if your are going with chrome valve covers than I would get these chrome blots.

http://www.summitracing.com/parts/TRD-9812/


http://i1210.photobucket.com/albums/...1/54203043.jpg

Re: will this work
 

Jojoman,
What heads do you have?
Posted via Mobile Device

Re: will this work
 

i got tbi heads on carb no tbibut i seen this thing about 23 degree heads i dont know what those are i dont think i got those i called this place here and they told me a air gap intake wouldnt be good for my motor since it idle high that what they said

Re: will this work
 

If you have TBI heads, you should have center bolt valve covers and the 2 center intake bolt holes are drilled at a different angle than older carb heads.
Posted via Mobile Device

Re: will this work
 

yea they drilled straight down instead of being angled i believe so what do you recommend

Re: will this work
 

You will either need an intake to fit the TBI heads or you will need to modify a standard intake. What intake do you have now?
Posted via Mobile Device

Re: will this work
 

which one do you guys recommend motor just stock mild cam headers right now has single plane intake http://www.summitracing.com/search/D.../?Ns=Price|Asc

Re: will this work
 

edelbrock performer