Big Red Air Valve Questions
 

I have split my big red valve into two parts. So now I have two set of two valves. I have put the set on each side of the frame.

I wanted to connect the valves with a supply line going from "suppy" of one to the "suppy" of the other. I also wanted to run a suppy line from one tank to the other tank.

Will this cause any problems?

Another question, There is an exhaust port on the valve system. What do i need to connect to this? Nothing is shown on the instructions.

Re: Big Red Air Valve Questions
 

you will have no issues setting it up that way at all, the valves and tanks will be pressurized at the same PSI, as for the exaust port just leave them open.

Re: Big Red Air Valve Questions
 

Cheers.................Thanks

Re: Big Red Air Valve Questions
 

anytime!!!!