The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - window regulator (https://67-72chevytrucks.com/vboard/showthread.php?t=463588)

grs	05-09-2011 07:14 PM

window regulator

What is the best way to replace the window regulator in my 87? I thought I placed this thread on the site, but I can't it.

BallGroundk10

05-09-2011 08:16 PM

Re: window regulator

I was in the process of redoing my doors until I found a used set with working motors off a 85 C10. My doors were in rough shape.
Unbolt the regulator and use a hammer to knock the bolts back away from the bolt holes. The window will then drop if its already up, if not lower it down and pull the window up and lay it to the side. Then you got your self a regulator to fish out of the door! GOOD LUCK

All times are GMT -4. The time now is 05:49 PM.