![]() |
Str8buban's 69 GMC
5 Attachment(s)
Well I am finally going to get some pics up now that I have figured out how to do it...or at least I think I have. I bought this burb from california about a month or so ago. Very straight and nice looking, it came with 2 new front fenders, radiator support, and I have all the inner and outer rocker panels. got crappy 6 lug drums all the way around, but I just picked up a 68 chevy that has been converted using everything off a 72, for pretty dang cheap :metal: basicaly going to switch everything in the front end and the rear in over, and gives me a good time to take all the parts off the parts truck and clean them up and powder coat them and not shut my burb down.
Plans...this is going to be a weekend driver, but my wife has already shut me down about spending to much right now(way to much stuff she wants done around the house now that it is spring) I have 4 kids so I would like to keep all the the seats (3rd row) and drop this as much as I can, dont think I can do the big c notch because after reading everyone elses build page and looking at there pics, I believe I would loose the 3rd row. want to get all suspension and frame work down this summer and then take it to my buddies body shop....and then the real fun begins... Ok that enough talking for now here is some pics..... |
Re: Str8buban's 69 GMC
Couple of questions about my pics...what do you all think about the full length roof air.....it is air for every rider in the vehicle and it is factory....I am sure you all have seen these before but I havent....is it worth keeping? the blowers work great, but someone unhooked everything under the hood.
|
Re: Str8buban's 69 GMC
Also does anyone know were I can get a rear hatch...mine is really REALLLY bad. really want to replace it, that is really the worse spot of rust, and what makes it worse is that I cant find a replacemet......
|
Re: Str8buban's 69 GMC
First of, this looks like a nice clean burb....i like that it'll be a rolling resto so you can enjoy it with the kiddos and wifey:D
Quote:
Quote:
|
Re: Str8buban's 69 GMC
I will take some pics of the hatch tonight. the outside of it is not bad...the inside of it is bad part..
also what options are you talking about with my ac unit. I thought about taking it down and replacing the blowers rewireing everything and wraping the whole thing in headliner material, or vinyle, wire in a couple of speakers and put it back up when I do the interior. just not sure how that would look... ?? |
Re: Str8buban's 69 GMC
check on the burb meassge board, but this is the option I was thinking of....http://67-72chevytrucks.com/vboard/s...d.php?t=461201
|
Re: Str8buban's 69 GMC
got another question..might be stupid but just need to know. going to pick up my lwb c10truck for parts today...does anyone know if the trailing arms on this truck are the same length as the ones on my burb?
|
Re: Str8buban's 69 GMC
I'm gonna say yes they should be the same length
|
Re: Str8buban's 69 GMC
I have a rear hatch I am pulling off next week if you are interested not perfect are you interested
Posted via Mobile Device |
Re: Str8buban's 69 GMC
yes i think all the trailing arms should be the same length, its where the ta crossmember bolts to that should be different.
nice truck btw..are you going to bag it? i noticed you didnt want to lose your 3rd row...what you could do is weld in a short step notch that wont bulge through the floor much, and turn the seat facing the rear hatch, like the old school station wagons had. |
Re: Str8buban's 69 GMC
Well we started to rip her apart last week so I got a couple of pics, found some new ugly rust to deal with, but we did get the hood ready for primer, and it http://i1089.photobucket.com/albums/...9/100_0215.jpgwas pretty bad in spots.
|
Re: Str8buban's 69 GMC
|
Re: Str8buban's 69 GMC
more rust...any suggestions on the best way to fix....clean it out and seamseal it?
http://i1089.photobucket.com/albums/...9/100_0220.jpg http://i1089.photobucket.com/albums/...9/100_0222.jpg http://i1089.photobucket.com/albums/...9/100_0221.jpg My hood in primer http://i1089.photobucket.com/albums/...9/100_0223.jpg |
Re: Str8buban's 69 GMC
Ok got the old rusty nasty metal cut our of the upper door jam and got the sand blaster out and went at it for a little while.....I have a donor truck for parts but after looking at the parts I cut out of the door, I just went to work and bent some metal that looks just like factory and going to put it in...(the last pic)
http://i1089.photobucket.com/albums/...9/100_0224.jpg http://i1089.photobucket.com/albums/...9/100_0225.jpg http://i1089.photobucket.com/albums/...9/100_0226.jpg |
Re: Str8buban's 69 GMC
|
Re: Str8buban's 69 GMC
Welcome to the board.
Great looking 'burb! |
Re: Str8buban's 69 GMC
Ok got some updates to post...got my hole fixed above passenger door
http://i1089.photobucket.com/albums/...9/100_0230.jpg turned out just like stock. here is some more pics of diggin rust out, getting ready to do rockers next, fixed cowl vents, one had a nest in it http://i1089.photobucket.com/albums/...9/100_0231.jpg http://i1089.photobucket.com/albums/...9/100_0232.jpg http://i1089.photobucket.com/albums/...9/100_0229.jpg Also got a rendering done, let me know what you all think....and if it is possible to find the molding I had him put on the burb. http://i1089.photobucket.com/albums/...illerPrint.jpg |
Re: Str8buban's 69 GMC
Open to any opinions, this is my first build, anything I need to do that im forgetting to do?
|
Re: Str8buban's 69 GMC
Love the build! Love the rendering! I guess Mar-K is making the 67-68 trim pieces for the burbs now. Look up Vectorit and his burb for more trim info.
|
Re: Str8buban's 69 GMC
i did the second row seat facing backwords for a while kids liked it...it was cool but havent put anything back in since i took it out
Quote:
|
Re: Str8buban's 69 GMC
nice burb i like the 69 - 70 GMC grill the best. I think the roof air will work out great and look good covered. You will have to make a sealed type box for the speaker so you don't loose cool air out of them. Who did the rendering?
|
Re: Str8buban's 69 GMC
that will be killer when its done !! great start !!
|
Re: Str8buban's 69 GMC
Quote:
|
Re: Str8buban's 69 GMC
Great looking project!
You're lucky. As I bought mine right here in the Midwest and it looks like swiss cheese! :lol: |
All times are GMT -4. The time now is 08:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com