Help me guys please!
 

ok just rebuilt my motor for the second time :mad: because it kept blowing headgaskets and now its running hot... just changed the radiator the fan clutch the thermostat and the water pumps also new wtf could be happening guys?

Re: Help me guys please!
 

Is it possible the tstat is in upside down.

Re: Help me guys please!
 

nope :/ i dont understand it

Re: Help me guys please!
 

try taking the tstat out and I would think this would be it but maybe got air in the coolent. And if you just had it rebuilt an it wasnt doing this before maybe some how your block got junk in it during the rebuild an its plugged up now.

Re: Help me guys please!
 

Just curious did you have the heads and block magnafluxed?

Re: Help me guys please!
 

make sure you have proper oil pressure. insufficient lubrication can cause it to heat faster than the cooling system can over come. is you radiator hooked up properly. do you have proper flow when the thermostat opens. have you used any sort of leak seal as the can build up and clog up the radiator

Re: Help me guys please!
 

Was your block and heads planed? If they arent flat it will continue to blow head gaskets.