The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Any reason to keep these brackets? (https://67-72chevytrucks.com/vboard/showthread.php?t=472761)

C10_ustacould 07-03-2011 12:40 PM
Any reason to keep these brackets?
 
2 Attachment(s)
Is there any reason to keep these brackets? I am going to use an LS/4L60 engine and trans.

HavinSomeFun 07-03-2011 01:51 PM
Re: Any reason to keep these brackets?
 
The first picture keep it. It will be part of your shift linkage. I'm not sure about the 2nd one.

C10_ustacould 07-03-2011 02:02 PM
Re: Any reason to keep these brackets?
 
Thanks Kevin!
Posted via Mobile Device

Flint70step 07-03-2011 02:21 PM
Re: Any reason to keep these brackets?
 
The second bracket is an exhaust hanger if I'm not mistaken.I used it and fabricated another for the pass. side when I made my Twice Pipes;)

FRENCHBLUE72 07-03-2011 02:23 PM
Re: Any reason to keep these brackets?
 
If your gonna run an aftermarket shifter then get rid of that 1st bracket..

C10_ustacould 07-03-2011 02:28 PM
Re: Any reason to keep these brackets?
 
I am going to use a column shift set up with a 4L60E or 4L65E...

Tx Firefighter 07-03-2011 02:45 PM
Re: Any reason to keep these brackets?
 
Even if you don't wind up needing it, the shifter bracket is worth money to someone on here who does need it.

C10_ustacould 07-03-2011 03:20 PM
Re: Any reason to keep these brackets?
 
Talked to Hart_Rod and he said I could remove it and use a Lokar shift linkage. I like that plan, it will open up that area for exhaust. Will put the bracket in my things to sell pile. Thanks for the input fellas.


All times are GMT -4. The time now is 02:48 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com