Are these connectors ok?
 

I went to my local j/y looking for a complete fuel line from tank to motor. I was not able to find a setup that used the corvette style regulator. I did find the other setup (i think).

Looking at the fuel tanks i noticed that gm didn't use any metal connectors or fancy braided hoses. I grabbed a couple of these and was wondering if these connectors would work from the fuel pump to the regulator?

If they could be used, how do you shape the tubing?

Re: Are these connectors ok?
 

I am using those from Dorman on my 88 and reused some of the Ford locks like that.

Re: Are these connectors ok?
 

good links for connectors courtesy of AITN

Here are a bunch of links, most of which have been posted
here before:

Mopar: http://dto.vftis.com/mopar/platform_select.asp [vftis.com]

ACDelco pigtails: http://www.acdelcotechconnect.com/pi/wiring-connectors/ [acdelcotechconnect.com]

Motorcraft pigtails: http://www.fordtechservice.dealercon...torcatalog.pdf [dealerconnection.com]

Nissan terminals/connectors: http://tools.nissantechmate.com/pdf/J-48817_HRK.pdf [nissantechmate.com]

Terminal Supply Co. http://terminalsupplyco.com/catalog/TSCfullcatalog.pdf [terminalsupplyco.com]

Mouser Electronics automotive terminals: http://www.mouser.com/search/Refine.aspx?N=2355233 [mouser.com]

Waytek, Inc: http://order.waytekwire.com/scategor...%20Connectors/ [waytekwire.com]

Ballenger Motorsports: http://www.bmotorsports.com/shop/index.php/cPath/109 [bmotorsports.com]

White Products terminals/connectors/tools: http://whiteproducts.com/index.shtml
[whiteproducts.com]

Deutch IPD: http://www.deutschconnector.com/ [deutschconnector.com]

Delphi Global Connection Systems: http://delphi.com/pdf/contact/brochu...balCatalog.pdf [delphi.com]

FCI automotive connectors/terminals: http://portal.fciconnect.com/portal/page/portal/Fc... [fciconnect.com]

Re: Are these connectors ok?
 

Is there a connector (that i can find in the local auto parts store), that will allow me to connect rubber hose to this sending unit?