The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   TX few parts from a 1978 big 10 part out (https://67-72chevytrucks.com/vboard/showthread.php?t=488763)

gearheads78 10-12-2011 11:07 PM

few parts from a 1978 big 10 part out
 
Most of the truck was scrapped but I still have a few good parts.
driver side tank for long bed $20.00
tailgate fair condition $30.00
12 bolt 3.08 non posi $100.00 SOLD
LH fender pretty nice $35.00

I still have a few other pieces I will add when I get pics but no other body parts.


I took pictures of everything remaining. I will cut deals on mutiple parts. Instead of add all the pics I just made a album with all the pics here:
http://s936.photobucket.com/albums/a.../1-15-11%20fs/

-454 plug wire heat shields $10.00 SOLD
-454 long water pump (off running motor) $20.00
-454 LH exhaust manifold $25.00
-454 / 350 motor mount clam shells $5.00
-454 lower cast iron a/c bracket only $5.00
-14" Grant mohogany wood wheel (no button) $30.00 SOLD
-plastic fuel tank rock gaurds $25.00
-454 throttle cable and qjet cable mount bracket $10.00
-TH400 gas pedal, braket and kickdown switch $20.00
-pair of power door lock accuators bench tested $30.00
-set of 8 bed mouning bolts and nuts $15.00 SOLD
-filler neck $10.00
-set of 4 body mount bolts $50.00
-hood release cable $10.00 SOLD
-ash tray $50.00
-front to rear chassis part of tail light harness splices at rear for trailer $10.00
-one pair door strap covers nice cores or driver $25.00
-metal splash guards for long bed (go under rear of bed) $20.00 SOLD
-wiper transmission $10.00
-wiper motor $15.00
-engine harness with starter heat shield (harness cut in several shpots use for parts only) $10.00
-bench seat tracks for cable and spings $40.00 SOLD
-power isolator mounts to firewall $5.00
-tailgate hold straps $10.00
-firewall harness holder $5.00
-center grill support $15.00
-hood latch with saftey catch $25.00
-set of 4 door hinges (needs pin bushings) $30.00
-LH drip rail $20.00
-RH door tan carpet with nice stainless trim $20.00
-hood hinges $35.00
-washer nossils $5.00
-silverado 10 emblem $5.00
-tan visors $20.00

TRC911 10-13-2011 08:37 PM

Re: few parts from a 1978 big 10 part out
 
Hi, Do you have the gas tank mounting bracket and straps?


If so let me know, mine are rusted and gone- my truck lived 20 years in Ottawa

gearheads78 10-13-2011 11:47 PM

Re: few parts from a 1978 big 10 part out
 
Quote:

Originally Posted by TRC911 (Post 4951974)
Hi, Do you have the gas tank mounting bracket and straps?


If so let me know, mine are rusted and gone- my truck lived 20 years in Ottawa

I still have all that. PM sent

TRC911 10-14-2011 05:12 PM

Re: few parts from a 1978 big 10 part out
 
-I wrote it wrong, I just need the mounting brackets and straps-

My bad-

PM sent

gearheads78 10-16-2011 02:18 PM

Re: few parts from a 1978 big 10 part out
 
updated with more parts

ScottH 10-17-2011 06:55 PM

Re: few parts from a 1978 big 10 part out
 
whats the best u can shipped to 08753 for the grant wheel?

thanks
Scott

Rogue_Sentinel 10-17-2011 07:37 PM

Re: few parts from a 1978 big 10 part out
 
pm

ScottH 10-18-2011 11:09 PM

Re: few parts from a 1978 big 10 part out
 
I'll take the Grant wheel, sending payment via PP.

thanks
Scott

gearheads78 10-30-2011 04:04 PM

Re: few parts from a 1978 big 10 part out
 
new lower prices listed

maskale 10-30-2011 04:10 PM

Re: few parts from a 1978 big 10 part out
 
got a good grill emblem?

gearheads78 10-30-2011 04:35 PM

Re: few parts from a 1978 big 10 part out
 
Quote:

Originally Posted by maskale (Post 4981829)
got a good grill emblem?

Sorry, everything I have left is listed there.

ScottH 10-30-2011 06:22 PM

Re: few parts from a 1978 big 10 part out
 
Got the wheel, thanks.

BTW was the wiper motor tested and in good working order?
Can u do $20 shipped on it if it is?

Thanks
Scott

scubasteve16 10-30-2011 06:44 PM

Re: few parts from a 1978 big 10 part out
 
I would like the 454 plug wire heat shields. Waht is the total cost shipped to 67410 Abilene Kansas? Also do you take paypal for payment?

qksilver 10-30-2011 08:16 PM

Re: few parts from a 1978 big 10 part out
 
curious, did it have dual exhaust, bb I guess it would. Do you have the factory dual exhaust hangers?

I am trying to put my 78 blazer back the way it was ordered, it came with factory dual exhaust and now it has some crap system one on it.

Thanks,
Steve

gearheads78 10-30-2011 09:54 PM

Re: few parts from a 1978 big 10 part out
 
Quote:

Originally Posted by scubasteve16 (Post 4982017)
I would like the 454 plug wire heat shields. Waht is the total cost shipped to 67410 Abilene Kansas? Also do you take paypal for payment?

I just sold them this afternoon. sorry

Quote:

Originally Posted by ScottH (Post 4981992)
Got the wheel, thanks.

BTW was the wiper motor tested and in good working order?
Can u do $20 shipped on it if it is?
Thanks
Scott

how about 25.00 to make sure I am not upside down on shipping


Quote:

Originally Posted by qksilver (Post 4982185)
curious, did it have dual exhaust, bb I guess it would. Do you have the factory dual exhaust hangers?
I am trying to put my 78 blazer back the way it was ordered, it came with factory dual exhaust and now it has some crap system one on it.

Thanks,
Steve


the exhaust was all hackd up. none of the factory stuff was there

ScottH 10-30-2011 10:43 PM

Re: few parts from a 1978 big 10 part out
 
looks like urs is different style than what I need for my 87, gonna have to pass.

c1069 10-31-2011 02:00 AM

Re: few parts from a 1978 big 10 part out
 
What color was the interior? Do you have a pic of the spid. I'm looking for some interior parts for this color check this tread http://67-72chevytrucks.com/vboard/s...d.php?t=486704

gearheads78 10-31-2011 12:20 PM

Re: few parts from a 1978 big 10 part out
 
Quote:

Originally Posted by c1069 (Post 4982762)
What color was the interior? Do you have a pic of the spid. I'm looking for some interior parts for this color check this tread http://67-72chevytrucks.com/vboard/s...d.php?t=486704

It had a tan interior but I can't tell you the code. The sticker was gone.

qksilver 10-31-2011 07:17 PM

Re: few parts from a 1978 big 10 part out
 
thx,
Steve

gearheads78 11-09-2011 12:01 PM

Re: few parts from a 1978 big 10 part out
 
Still have some of this stuff. Make offers.

Ford Assassin 04-30-2012 06:16 PM

Re: few parts from a 1978 big 10 part out
 
Digging up an old thread (search)....

Quote:

Originally Posted by gearheads78 (Post 4950484)
Most of the truck was scrapped but I still have a few good parts.

-454 / 350 motor mount clam shells $5.00

Still have them? 2wd? PayPal?

If yes to all 3, I'll take them and I have my finger on the PayPal button.

Thanks!!

gearheads78 04-30-2012 06:57 PM

Re: few parts from a 1978 big 10 part out
 
Quote:

Originally Posted by Ford Assassin (Post 5345459)
Digging up an old thread (search)....



Still have them? 2wd? PayPal?

If yes to all 3, I'll take them and I have my finger on the PayPal button.

Thanks!!

I will try to look tonight.

Ford Assassin 04-30-2012 07:00 PM

Re: few parts from a 1978 big 10 part out
 
Sounds good, thanks!

gearheads78 04-30-2012 11:38 PM

Re: few parts from a 1978 big 10 part out
 
I looked tonight and didn't find any. I know I have some just not sure where they are hiding right now.

gearheads78 07-01-2012 09:35 AM

Re: few parts from a 1978 big 10 part out
 
ttt still have some of this


All times are GMT -4. The time now is 07:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com