TX few parts from a 1978 big 10 part out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gearheads78 · 10-12-2011, 11:07 PM

Most of the truck was scrapped but I still have a few good parts.
driver side tank for long bed $20.00
tailgate fair condition $30.00
12 bolt 3.08 non posi $100.00 SOLD
LH fender pretty nice $35.00

I still have a few other pieces I will add when I get pics but no other body parts.

I took pictures of everything remaining. I will cut deals on mutiple parts. Instead of add all the pics I just made a album with all the pics here:
http://s936.photobucket.com/albums/a.../1-15-11%20fs/

-454 plug wire heat shields $10.00 SOLD
-454 long water pump (off running motor) $20.00
-454 LH exhaust manifold $25.00
-454 / 350 motor mount clam shells $5.00
-454 lower cast iron a/c bracket only $5.00
-14" Grant mohogany wood wheel (no button) $30.00 SOLD
-plastic fuel tank rock gaurds $25.00
-454 throttle cable and qjet cable mount bracket $10.00
-TH400 gas pedal, braket and kickdown switch $20.00
-pair of power door lock accuators bench tested $30.00
-set of 8 bed mouning bolts and nuts $15.00 SOLD
-filler neck $10.00
-set of 4 body mount bolts $50.00
-hood release cable $10.00 SOLD
-ash tray $50.00
-front to rear chassis part of tail light harness splices at rear for trailer $10.00
-one pair door strap covers nice cores or driver $25.00
-metal splash guards for long bed (go under rear of bed) $20.00 SOLD
-wiper transmission $10.00
-wiper motor $15.00
-engine harness with starter heat shield (harness cut in several shpots use for parts only) $10.00
-bench seat tracks for cable and spings $40.00 SOLD
-power isolator mounts to firewall $5.00
-tailgate hold straps $10.00
-firewall harness holder $5.00
-center grill support $15.00
-hood latch with saftey catch $25.00
-set of 4 door hinges (needs pin bushings) $30.00
-LH drip rail $20.00
-RH door tan carpet with nice stainless trim $20.00
-hood hinges $35.00
-washer nossils $5.00
-silverado 10 emblem $5.00
-tan visors $20.00

TRC911 · 10-13-2011, 08:37 PM

Hi, Do you have the gas tank mounting bracket and straps?

If so let me know, mine are rusted and gone- my truck lived 20 years in Ottawa

gearheads78 · 10-13-2011, 11:47 PM

Quote:

Originally Posted by TRC911

Hi, Do you have the gas tank mounting bracket and straps?

If so let me know, mine are rusted and gone- my truck lived 20 years in Ottawa

I still have all that. PM sent

TRC911 · 10-14-2011, 05:12 PM

-I wrote it wrong, I just need the mounting brackets and straps-

My bad-

PM sent

gearheads78 · 10-16-2011, 02:18 PM

updated with more parts

**ScottH** · 10-17-2011, 06:55 PM

whats the best u can shipped to 08753 for the grant wheel?

thanks
Scott

Rogue_Sentinel · 10-17-2011, 07:37 PM

pm

**ScottH** · 10-18-2011, 11:09 PM

I'll take the Grant wheel, sending payment via PP.

thanks
Scott

gearheads78 · 10-30-2011, 04:04 PM

new lower prices listed

maskale · 10-30-2011, 04:10 PM

got a good grill emblem?

gearheads78 · 10-30-2011, 04:35 PM

Quote:

Originally Posted by maskale

got a good grill emblem?

Sorry, everything I have left is listed there.

**ScottH** · 10-30-2011, 06:22 PM

Got the wheel, thanks.

BTW was the wiper motor tested and in good working order?
Can u do $20 shipped on it if it is?

Thanks
Scott

scubasteve16 · 10-30-2011, 06:44 PM

I would like the 454 plug wire heat shields. Waht is the total cost shipped to 67410 Abilene Kansas? Also do you take paypal for payment?

qksilver · 10-30-2011, 08:16 PM

curious, did it have dual exhaust, bb I guess it would. Do you have the factory dual exhaust hangers?

I am trying to put my 78 blazer back the way it was ordered, it came with factory dual exhaust and now it has some crap system one on it.

Thanks,
Steve

gearheads78 · 10-30-2011, 09:54 PM

Quote:

Originally Posted by scubasteve16

I would like the 454 plug wire heat shields. Waht is the total cost shipped to 67410 Abilene Kansas? Also do you take paypal for payment?

I just sold them this afternoon. sorry

Quote:

Originally Posted by ScottH

Got the wheel, thanks.

BTW was the wiper motor tested and in good working order?
Can u do $20 shipped on it if it is?
Thanks
Scott

how about 25.00 to make sure I am not upside down on shipping

Quote:

Originally Posted by qksilver

curious, did it have dual exhaust, bb I guess it would. Do you have the factory dual exhaust hangers?
I am trying to put my 78 blazer back the way it was ordered, it came with factory dual exhaust and now it has some crap system one on it.

Thanks,
Steve

the exhaust was all hackd up. none of the factory stuff was there

**ScottH** · 10-30-2011, 10:43 PM

looks like urs is different style than what I need for my 87, gonna have to pass.

c1069 · 10-31-2011, 02:00 AM

What color was the interior? Do you have a pic of the spid. I'm looking for some interior parts for this color check this tread http://67-72chevytrucks.com/vboard/s...d.php?t=486704

gearheads78 · 10-31-2011, 12:20 PM

Quote:

Originally Posted by c1069

What color was the interior? Do you have a pic of the spid. I'm looking for some interior parts for this color check this tread http://67-72chevytrucks.com/vboard/s...d.php?t=486704

It had a tan interior but I can't tell you the code. The sticker was gone.

qksilver · 10-31-2011, 07:17 PM

thx,
Steve

gearheads78 · 11-09-2011, 12:01 PM

Still have some of this stuff. Make offers.

Ford Assassin · 04-30-2012, 06:16 PM

Digging up an old thread (search)....

Quote:

Originally Posted by gearheads78

Most of the truck was scrapped but I still have a few good parts.

-454 / 350 motor mount clam shells $5.00

Still have them? 2wd? PayPal?

If yes to all 3, I'll take them and I have my finger on the PayPal button.

Thanks!!

gearheads78 · 04-30-2012, 06:57 PM

Quote:

Originally Posted by Ford Assassin

Digging up an old thread (search)....

Still have them? 2wd? PayPal?

If yes to all 3, I'll take them and I have my finger on the PayPal button.

Thanks!!

I will try to look tonight.

Ford Assassin · 04-30-2012, 07:00 PM

Sounds good, thanks!

gearheads78 · 04-30-2012, 11:38 PM

I looked tonight and didn't find any. I know I have some just not sure where they are hiding right now.

gearheads78 · 07-01-2012, 09:35 AM

ttt still have some of this

10-12-2011, 11:07 PM	#1
gearheads78 Registered User Join Date: Aug 2011 Location: Dallas TX Posts: 563	few parts from a 1978 big 10 part out Most of the truck was scrapped but I still have a few good parts. driver side tank for long bed $20.00 tailgate fair condition $30.00 12 bolt 3.08 non posi $100.00 SOLD LH fender pretty nice $35.00 I still have a few other pieces I will add when I get pics but no other body parts. I took pictures of everything remaining. I will cut deals on mutiple parts. Instead of add all the pics I just made a album with all the pics here: http://s936.photobucket.com/albums/a.../1-15-11%20fs/ -454 plug wire heat shields $10.00 SOLD -454 long water pump (off running motor) $20.00 -454 LH exhaust manifold $25.00 -454 / 350 motor mount clam shells $5.00 -454 lower cast iron a/c bracket only $5.00 -14" Grant mohogany wood wheel (no button) $30.00 SOLD -plastic fuel tank rock gaurds $25.00 -454 throttle cable and qjet cable mount bracket $10.00 -TH400 gas pedal, braket and kickdown switch $20.00 -pair of power door lock accuators bench tested $30.00 -set of 8 bed mouning bolts and nuts $15.00 SOLD -filler neck $10.00 -set of 4 body mount bolts $50.00 -hood release cable $10.00 SOLD -ash tray $50.00 -front to rear chassis part of tail light harness splices at rear for trailer $10.00 -one pair door strap covers nice cores or driver $25.00 -metal splash guards for long bed (go under rear of bed) $20.00 SOLD -wiper transmission $10.00 -wiper motor $15.00 -engine harness with starter heat shield (harness cut in several shpots use for parts only) $10.00 -bench seat tracks for cable and spings $40.00 SOLD -power isolator mounts to firewall $5.00 -tailgate hold straps $10.00 -firewall harness holder $5.00 -center grill support $15.00 -hood latch with saftey catch $25.00 -set of 4 door hinges (needs pin bushings) $30.00 -LH drip rail $20.00 -RH door tan carpet with nice stainless trim $20.00 -hood hinges $35.00 -washer nossils $5.00 -silverado 10 emblem $5.00 -tan visors $20.00 Last edited by gearheads78; 10-30-2011 at 09:57 PM.

10-13-2011, 08:37 PM	#2
TRC911 Registered User Join Date: Sep 2011 Location: KY Posts: 25	Re: few parts from a 1978 big 10 part out Hi, Do you have the gas tank mounting bracket and straps? If so let me know, mine are rusted and gone- my truck lived 20 years in Ottawa

10-14-2011, 05:12 PM	#4
TRC911 Registered User Join Date: Sep 2011 Location: KY Posts: 25	Re: few parts from a 1978 big 10 part out -I wrote it wrong, I just need the mounting brackets and straps- My bad- PM sent

10-16-2011, 02:18 PM	#5
gearheads78 Registered User Join Date: Aug 2011 Location: Dallas TX Posts: 563	Re: few parts from a 1978 big 10 part out updated with more parts

10-17-2011, 06:55 PM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: few parts from a 1978 big 10 part out whats the best u can shipped to 08753 for the grant wheel? thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-17-2011, 07:37 PM	#7
Rogue_Sentinel Registered User Join Date: Mar 2009 Location: nc, mount airy Posts: 376	Re: few parts from a 1978 big 10 part out pm __________________ "Myths and legends die hard in America. We love them for the extra dimension they provide, the illusion of near-infinite possibility to erase the narrow confines of most men's reality. Weird heroes and mould-breaking champions exist as living proof to those who need it that the tyranny of 'the rat race' is not yet final." Hunter S THompson

10-18-2011, 11:09 PM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: few parts from a 1978 big 10 part out I'll take the Grant wheel, sending payment via PP. thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-30-2011, 04:04 PM	#9
gearheads78 Registered User Join Date: Aug 2011 Location: Dallas TX Posts: 563	Re: few parts from a 1978 big 10 part out new lower prices listed

10-30-2011, 04:10 PM	#10
maskale Registered User Join Date: Jul 2011 Location: Houston, Tx Posts: 159	Re: few parts from a 1978 big 10 part out got a good grill emblem?

10-30-2011, 06:22 PM	#12
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: few parts from a 1978 big 10 part out Got the wheel, thanks. BTW was the wiper motor tested and in good working order? Can u do $20 shipped on it if it is? Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-30-2011, 06:44 PM	#13
scubasteve16 Registered User Join Date: Sep 2010 Location: Abilene Kansas Posts: 78	Re: few parts from a 1978 big 10 part out I would like the 454 plug wire heat shields. Waht is the total cost shipped to 67410 Abilene Kansas? Also do you take paypal for payment? __________________ "If it throws you back in the seat when it shifts, it was slowing down before it shifted" Disturbed Customs 1992 Chevy 1/2 ton 4x4 wore out 350 1975 Chevy 3/4 ton 4x4/ 8" suspension lift/ 468 Big Block/ 4 speed/ 4.56 gears/ 17' American Racing simulated beadlocks with Pro Comp 37x12.50 tires 1950 Pontiac Chieftain Straight 8/Hydromatic tranny

10-30-2011, 08:16 PM	#14
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: few parts from a 1978 big 10 part out curious, did it have dual exhaust, bb I guess it would. Do you have the factory dual exhaust hangers? I am trying to put my 78 blazer back the way it was ordered, it came with factory dual exhaust and now it has some crap system one on it. Thanks, Steve

10-30-2011, 10:43 PM	#16
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: few parts from a 1978 big 10 part out looks like urs is different style than what I need for my 87, gonna have to pass. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-31-2011, 02:00 AM	#17
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: few parts from a 1978 big 10 part out What color was the interior? Do you have a pic of the spid. I'm looking for some interior parts for this color check this tread http://67-72chevytrucks.com/vboard/s...d.php?t=486704 __________________ Pancho 69 c/10 step side 454/400 with 3.07

10-31-2011, 07:17 PM	#19
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: few parts from a 1978 big 10 part out thx, Steve



Register or Log In To remove these advertisements.

11-09-2011, 12:01 PM	#20
gearheads78 Registered User Join Date: Aug 2011 Location: Dallas TX Posts: 563	Re: few parts from a 1978 big 10 part out Still have some of this stuff. Make offers.

04-30-2012, 07:00 PM	#23
Ford Assassin Registered User Join Date: Jun 2008 Location: Jackson, Ca. Posts: 674	Re: few parts from a 1978 big 10 part out Sounds good, thanks! __________________ Cable -K5 Blazer 2wd: 6.0 LQ4, 7875 Turbo, Tick Stage II Turbo Cam, Built 4L80e, RevMax Billet 3600, 9.5" 14 Bolt -Chevy 3+3 Crew Cab Dually: Cummins 12v P-Pump Swap, Compound Turbos, A2W Intercooler, NV4500HD, 4wd conversion, Radius Arms, Coilovers, Crossover Steering, etc Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=803608

04-30-2012, 11:38 PM	#24
gearheads78 Registered User Join Date: Aug 2011 Location: Dallas TX Posts: 563	Re: few parts from a 1978 big 10 part out I looked tonight and didn't find any. I know I have some just not sure where they are hiding right now.

07-01-2012, 09:35 AM	#25
gearheads78 Registered User Join Date: Aug 2011 Location: Dallas TX Posts: 563	Re: few parts from a 1978 big 10 part out ttt still have some of this

Register or Log In To remove these advertisements.