dropped spindles with 4 3/4 bolt circle
 

like it says in title. anyone make a dropped spndl that i can run a rotor that has a 4 3/4 bc. reason being is i ahve a garage full of wheels/mags/ralleys with this bc. oh the truck is a 67 chebbie. thanks

sorry didn't see the post by buddylee on 4 3/4 bolt cir.

Re: dropped spindles with 4 3/4 bolt circle
 

sure we have done them in 4.3/4 " disc brakes and used s10 wheels for stock looking vehicles. Its prettty common

Re: dropped spindles with 4 3/4 bolt circle
 

make sure i'm clear here. i want to put a dropped spindle on a 67 c-10 and run a discbrake that has a 5on 4 3/4 bc. i also want to put a car rear end under the truck .if you can do that. tell me what i need to buy, and where i can send you the $$$

Re: dropped spindles with 4 3/4 bolt circle
 

Not sure about the front rotors but i has moser make rear axles with the small bolt pattern and bought 11x2 car drums napa # ending with 1060
Posted via Mobile Device

Re: dropped spindles with 4 3/4 bolt circle
 

Use Belltech drop spindles for a '81-'87 LIGHT DUTY, 1" thick rotor. You will need to swap balljoints and tie-rods to the newer stuff. Run '91 Camaro 1LE rotors. They are the same as the LD rotors, but in 4.75" bolt circle...

Re: dropped spindles with 4 3/4 bolt circle
 

Conversely, Performance Online offers brackets for your stock drum spindles that convert to 4.75" discs, but provide no drop...