Brake Light Fuse Keeps Blowing
 

I've got a 1977 Chevy C-10 without cruise. My brake light fuse keeps blowing as soon as I push the brake pedal down. I've checked the wiring in the dash and it all looks good. Seems to me that if the problem was in the chassis wiring I wouldn't have turn signals and/or parking lights, but I still have those. Could it possibly be something wrong in the turn signal switch?? I checked the brake light switch and it's fine. Doesn't the problem have to be between the brake light switch and the point where the brake lights and turn signals are combined??

Re: Brake Light Fuse Keeps Blowing
 

Do you have trailer wiring i did and we played this game called bump where you tap each other car and my friend elco smashed up my trailer wires and caused a short and would blow my tail lamp fuse every time
I ALSO BELEIVE YOU LOOSE YOUR DOME LAMP AND CIG LIGTHER AS WELL MAYBE THAT WAS NOTHER FUSE IDK JUST KEEP IT IN MIND

Re: Brake Light Fuse Keeps Blowing
 

yes, usually a pinched wire.. remove the fuse, and the light.. then test that wire to ground.. somewhere the bare copper is touching the truck.. that draws to much current, fuse blows..usually easy to find but that kind of trouble is my job..

if you do not have a meter, a test light, one side to battery, the other side to that wire will light the test lamp... using the brake wire as a ground.. IF you can not find the short, run a new wire.. cut it in half, replace the fuse and then press the brake.. now you know which half the cross is in..

Re: Brake Light Fuse Keeps Blowing
 

if i can be of any help. leave a msg... 35 years a telephone man, pretty good with wires

Re: Brake Light Fuse Keeps Blowing
 

I removed the power wire to my brake controller thinking that may be the problem but it wasn't. I think i'll check the trailer plug tomorrow too now JIC. John I will try your suggestions too. Thanks.

Re: Brake Light Fuse Keeps Blowing
 

Well it turns out that the problem was in the turn signal switch connection. It had come loose from its retaining bracket and was touching the steering column.