The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Help!!!!! (https://67-72chevytrucks.com/vboard/showthread.php?t=493257)

darush01 11-10-2011 08:19 PM

Help!!!!!
 
My clutch went out in me 72 c20 350 4 spd i replaced the clutch pressure plate and throwout bearin but i still have no pedal, upon further investigating i found the pivot rod from th frame to the block is cracked can this be welded back even if its only temporary?
Posted via Mobile Device

tasian 11-11-2011 12:09 AM

Re: Help!!!!!
 
i would say so as long as you can get a good weld on it where it cracked it should be good as new cant end up worse then mine that the PO notched out to clear the headers :lol:

oh and just a heads watch for the grease inside to catch fire when your welding on it


All times are GMT -4. The time now is 05:29 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com