The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   found a 6.0. need to make sure im getting everything. (https://67-72chevytrucks.com/vboard/showthread.php?t=498342)

okieraptor 12-13-2011 06:23 PM

found a 6.0. need to make sure im getting everything.
 
Its out of a 05 2500. I know i need the unmolested wiring harness and ecm as well as the gas pedal. Is there anything else i need from the donor truck to slap this in my square?

Ill be using my 700r4 so i dont need anything tranny wise.

Thanks Okie
Posted via Mobile Device

harnalien 12-13-2011 07:10 PM

Re: found a 6.0. need to make sure im getting everything.
 
Well if it's a Drive By Wire throttle body, you'll need to figure out how to hook up your TV cable from the 700.

okieraptor 12-13-2011 08:05 PM

Re: found a 6.0. need to make sure im getting everything.
 
Ah i forgot about that. Got any ideas on how to do that?
Posted via Mobile Device

harnalien 12-13-2011 08:51 PM

Re: found a 6.0. need to make sure im getting everything.
 
I couldn't find any viable options when I was doing mine, so I had to switch to a cable throttle body. My 700 is toast now, so that was a waste of time. Others have had luck, so who knows. Anyway, I am unaware of any options to hook up a 700 to a DBW throttle body.

okieraptor 12-13-2011 09:34 PM

Re: found a 6.0. need to make sure im getting everything.
 
Ok thanks for the info.
Posted via Mobile Device

Bigo Serge 12-17-2011 12:05 AM

Re: found a 6.0. need to make sure im getting everything.
 
I would use the transmission from the donor truck. You will be a whole lot happier with the electric shifting trans, since the harness is all there. If you need any work done to your computer or harness I HIGHLY recommend John at Speartech.

okieraptor 12-17-2011 02:27 AM

Re: found a 6.0. need to make sure im getting everything.
 
I would but the 4l80 is gone already. My buddy that is the manger said the owner sold it out the xay thsy got it for 500$. Wish i could have been that lucky guy!
Posted via Mobile Device

duwem 12-21-2011 01:20 PM

Re: found a 6.0. need to make sure im getting everything.
 
The ealier drive by wire engines needed a TAC (throttle actuation control) module but the later ones this might be built into the ECU???

BR3W CITY 12-21-2011 02:04 PM

Re: found a 6.0. need to make sure im getting everything.
 
05 is usually the switching point. Trailblazers in 05 got the new pcm which ran directly to the TAC Pedal, other 05 vehicles would still have a TAC module and pedal.

ls1nova71 12-21-2011 03:12 PM

Re: found a 6.0. need to make sure im getting everything.
 
On full size trucks 2007 is the last year they had a TAC, and that is only in the OLD body style (or Silverado Classic I think they called them) '07's, the NEW body style '07's don't have them.


All times are GMT -4. The time now is 07:33 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com