![]() |
Bogs off idle, any ideas?
When I press the throttle it has a BIT of hesitation. Any ideas on how I should tune the carb? It's an untouched Holley 4160 600cfm Electric Choke/Vacuum Secondaries. I think I have it pretty lean at idle, should I richen up the idle? Thanks guys!
|
If its boging at idle, I would have thought that that meant it was too rich. :confused:
|
I have an edelbrock, dont know if its the same as yours but I had to get diffrent metering rods
|
A bad EGR valve will also cause a slight bog off idle.
If you have an EGR try to unhook the vacuum line and plug the line, then take it for a cruise. If it acts fine now, then its your EGR. If it still does it, its probly carb or timing related. |
Quote:
|
It may NOT be the EGR. I suggest you test it.
|
All times are GMT -4. The time now is 08:22 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com