![]() |
Factory speaker sizes?
Hello All,
I recently purchased a 1986 Silverado SB 2WD. It has what appears to be factory rear speakers (both sides) and three front (dash) speakers. My wife purchased me the Retro Sound model #8573 stereo from LMC for Christmas. I would like to replace the speakers at the same time that I install the stereo. What size are the factory speakers and does anyone have a suggestion for what to replace them with? Thanks in advance for your input, Ratman |
Re: Factory speaker sizes?
dash is 3 1/4" round
behind seat is 4x10" |
Re: Factory speaker sizes?
Quote:
|
Re: Factory speaker sizes?
http://www.crutchfield.com/p_065SE35...35.html?tp=105
front http://www.crutchfield.com/p_113KFC4...ml?tp=99&avf=N rear fyi late 90's early 2000's cattys have bose or infinity 4x10's .. might be worth a trip to junk yard.. if looking on a cheap good 4x10 fronts .. nothing stock is all that good..lol |
Re: Factory speaker sizes?
So are you saying that the center dash speaker is not used?
P.S. Thanks for your help! |
Re: Factory speaker sizes?
Quote:
|
Re: Factory speaker sizes?
Quote:
Cool, thanks! |
Re: Factory speaker sizes?
you could wire a center speaker in series (mono) off of the front channels if the deck has 4 channels. That would give you a center stage, or you could not use it. I am using 2 3.5" 2-ways in the center of my '66. But I like having a center stage.
|
Re: Factory speaker sizes?
Can the dash speakers be mounted by removing the dash pad or do they need to be installed from under the dash?
|
Re: Factory speaker sizes?
Quote:
|
Re: Factory speaker sizes?
Quote:
|
Re: Factory speaker sizes?
there is a bracket (holding the speaker to the hole)if you can eliminate it you should be able to get a bigger speaker in there...
|
Re: Factory speaker sizes?
[QUOTE=WAAF;5090356]http://www.crutchfield.com/p_065SE35...35.html?tp=105
front http://www.crutchfield.com/p_113KFC4...ml?tp=99&avf=N rear [QUOTE=WAAF;5090356] Bought these and finally got around to installing them this weekend. Just an FYI these 4x10's are much deeper than the factory ones and I had to make spacers to give them enough room for the additional depth. |
All times are GMT -4. The time now is 06:17 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com