Project: Truant 69 SS
 

Finally I'm back in the 67-72 C10 game. My dad bought this truck about three or four years ago but never really did anything with it. When he got it the original six was still in it with a three on the tree. It has been here locally all its life. It was owned by the local board of education and was used as a parts truck for the school bus shop. The truck supposedly ran just had a bad fuel pump but he pulled the motor out with plans to put a 454 and a four speed in it. Well to make a long story short the guy that was doing the work for him pulled the motor but never got around to putting the new engine in. So it sat for another year or two. Then about six months ago he decided he was gonna get a guy to put the bed sides back on it and weld in the patch panels, install the new grill, etc. So he got the truck loaded up to take it before he realized that someone had stolen the new tail gate, head gate, and grille out of our storage trailer. Now keep in mind this wasn't repo stuff this was all factory GM pieces. So needless to say after that he was disgusted because most all his good pieces were gone. The truck has been sitting on the back of our ramp truck since then:lol:

So that brings us to now. He finally(knew it was just a matter of time) told me to take the truck and do whatever I wanted with it he was tired of messing with it. While 69-70 is my least favorite year I'm still excited about it. The truck is gonna be a nice driver, no show quality but something I can take to the local shows without being ashamed of it. Here is the truck the last pictures I took.
http://i239.photobucket.com/albums/f...d/DSC_0726.jpg
http://i239.photobucket.com/albums/f...d/DSC_0727.jpg
I dont really know what the plans are right now. First things first I'm gonna get the truck in primer. I've got two really good bed fenders for it. I'll probably leave the truck painted in primer for a while until I get the drive train all finished up. Thinking of doing just a basic reman 350 engine. I plan on driving it a lot so I want good gas mileage and something that will be dependable. As much as I'd like to put a four speed or five speed trans in it I'll probably just drop the clutch pedal out and go back with an automatic. I've got a couple of turbo 350's laying around the house I could build for it.
I'll post more plans and pictures later, hopefully gonna dive into it a little bit this weekend.:metal:

Re: Project: Truant 69 SS
 

Been doing some more thinking and planning today and here is the basic plan for the truck.

Primer it black and go with some vintage style door artwork to advertise my auto parts store. For the interior I'm gonna go with a red/black mix. Gonna keep it simple nothing fancy.

Lower it as low as possible without any major mods or frame cutting, I dont want it too low because my driveway sucks.

I'm gonna get a turbo 350 rebuilt and stick in it with a Lokar shifter.

I'm still stuck on the motor. I can get a stock reman for about 1100 bucks. I have access to a set of double hump heads I could probably get for free from my dad, Im sure I can round up a 350 or 327 block, Im just not sure if i could get it built for about the same amount of money or not.

Re: Project: Truant 69 SS
 

I think it's gonna come out looking good man. Already got a nice start.

Re: Project: Truant 69 SS
 

Well I had hoped to get the truck unloaded today and a place cleaned out in the shop for it but its rained just about all day. Did snap a few quick pictures of it though. The rust is worse than I remembered in a spot or two.

http://southeasternfoxbodies.com/for...ictureid=29119

http://southeasternfoxbodies.com/for...ictureid=29116

http://southeasternfoxbodies.com/for...ictureid=29113

You cant see it good in this picture but the firewall has been prepped and painted and are about ready to go.
http://southeasternfoxbodies.com/for...ictureid=29117

Glad its winter time and I didnt get stung!!
http://southeasternfoxbodies.com/for...ictureid=29118

http://southeasternfoxbodies.com/for...ictureid=29115

Little sign from her county service days.
http://southeasternfoxbodies.com/for...ictureid=29114

Re: Project: Truant 69 SS
 

Not sure what happened to those other three pictures, here they are.
http://southeasternfoxbodies.com/for...ictureid=29117

http://southeasternfoxbodies.com/for...ictureid=29115

http://southeasternfoxbodies.com/for...ictureid=29114

Re: Project: Truant 69 SS
 

Good thing about rust, it can be fixed. That's why it's a project. Looking at this makes me miss my '72 3/4-Ton 4x4. My uncle gave it to me, as a project. I never put it on the road and traded it to a guy for my '88 K1500.

Re: Project: Truant 69 SS
 

Yeap rust can be fixed! Just means more work and more money!!:dohh:

Re: Project: Truant 69 SS
 

All right got it unloaded today. Still dont have a place inside for it but I can do a lot of work with it sitting out, just sucks because I wont be able to work on it at night during the week after work but its all I've got right now. Snapped a few more pictures.

http://southeasternfoxbodies.com/for...ictureid=29141

http://southeasternfoxbodies.com/for...ictureid=29142

http://southeasternfoxbodies.com/for...ictureid=29143

http://southeasternfoxbodies.com/for...ictureid=29145

http://southeasternfoxbodies.com/for...ictureid=29148

Bed is shot, probably just gonna go with a piece of steel in the bed. Wood would be nice but I plan on running a bed cover anyway. So I'll probably just lay steel and then possibly carpet the bed.
http://southeasternfoxbodies.com/for...ictureid=29149

Picture didn't turn out great but as you can see there weren't many options on this bad boy!!
http://southeasternfoxbodies.com/for...ictureid=29146

I found this in the glove box. Looks like a radio delete plate??? I assume that is probably how it came to start with.
http://southeasternfoxbodies.com/for...ictureid=29150

Is this radio a factory one?? I wasn't sure.
http://southeasternfoxbodies.com/for...ictureid=29147

I assume this was the last time she was on the road.
http://southeasternfoxbodies.com/for...ictureid=29144

Re: Project: Truant 69 SS
 

Good start,I hope you leave it a 69-70 front end.

Re: Project: Truant 69 SS
 

I plan on it! While its not my favorite front end eventually I'd like to have one of each of the three trucks so I might as well start with this front end.

Re: Project: Truant 69 SS
 

yes, that's a radio delete plate. does it have the 2 clips on the back of it to mount it? No, that is not a factory radio.

Re: Project: Truant 69 SS
 

One clip, but I think I saw the other one in the glove box maybe.