71/72 gas pedal assemblies with T400 kickdown
 

One with wiring $40.00 shipped in CONUS SOLD

And one without wiring.. $35.00 shipped in CONUS ONE SOLD Several more available without wiring.. with or without deluxe pedal pad

(Sorry no cables available)

The wiring harnesses are available new from American Auto Wire for $18.00 each

http://shop.americanautowire.com/71-...wnharness.aspx

Re: 71/72 gas pedal assemblies with T400 kickdown
 

Do you have any accelerator cables and the bracket on carb?

Re: 71/72 gas pedal assemblies with T400 kickdown
 

I'll get in line for the one without wiring.IM inbound

Re: 71/72 gas pedal assemblies with T400 kickdown
 

Sorry no cables at all, I do have carb brackets that I would include with the pedal assembly.

Joe, the one without wiring is yours. Thank you

Re: 71/72 gas pedal assemblies with T400 kickdown
 

Thanks, but I just need a bracket for the carb.

Re: 71/72 gas pedal assemblies with T400 kickdown
 

PM me your mailing address and I will send you one. (its for a 4bbl Q-jet)

Re: 71/72 gas pedal assemblies with T400 kickdown
 

I'll need one for a 2bbl. Thanks for the kind gesture tho.

Re: 71/72 gas pedal assemblies with T400 kickdown
 

I may have one for a 2bbl, I'll take a look today

Re: 71/72 gas pedal assemblies with T400 kickdown
 

Thanks............

Re: 71/72 gas pedal assemblies with T400 kickdown
 

Mark, The one with wiring, is that complete with bracket for 4 BBL? If so I'll take it. Thx DP

Re: 71/72 gas pedal assemblies with T400 kickdown
 

David, Yes I will include the carb bracket. (I didn't think of adding them to the original post). The only items I do not have are the bolts or cables

Re: 71/72 gas pedal assemblies with T400 kickdown
 

That's OK, I have bolts for it. Cables, Are you referring to accel cable?
What I'm doing is gathering the parts to convert my 72 K20 to a TB400/205 setup that I have. I plan on setting the Tran/TC and leave the engine cradle in place. This set-up should work for it. If there is any other items neded, let me know. Thanks David

Re: 71/72 gas pedal assemblies with T400 kickdown
 

Yes, I was referring to the accelerator cable.
If you leave the engine cradle where it sits and put in a T400 it will move the transfer case and rear crossmember rearward, making driveline changes necessary,(A T400 is longer than the T350)
Also you you will need to relocate the 205 shifter as it will be moved rearward, I have an Advance adapter shifter handle relocator I will toss in for you.

Re: 71/72 gas pedal assemblies with T400 kickdown
 

Thanks Mark. Also, I think I will need a TB 400 auto tranmission linkage. Would you have some spare parts laying around? - :D - Give me a price...

Re: 71/72 gas pedal assemblies with T400 kickdown
 

The linkage remains the same as the shift rod on the T400 is in the same location as your
T350, the difference between the two is the overall length of the trans.

Re: 71/72 gas pedal assemblies with T400 kickdown
 

I have one for 71/72 2bbl, It bolts to the coil bracket towers on the rear of the intake manifold,
If that is the one you need PM me your mailing address and I get it on the way..

Re: 71/72 gas pedal assemblies with T400 kickdown
 

I see this post is from January, but if you have any of the pedals left I will take one.

Re: 71/72 gas pedal assemblies with T400 kickdown
 

Sorry, they are all gone.