Replacement engine mounts > Beware!
 

Has anybody bought clamshell type engine mounts lately? Man, there terrible quality! Last year I bought a new set from Napa thinking they would be “good” being they came from Napa instead of a dime store part house like AutoZone. Meh, they didn’t last a year. I first started noticing the fan was rubbing the shroud this summer on the desert trip when flexed hard. Then it started doing it more and more until I crawled under it to find both new mounts caved in pushing the 8.1L oil pan right into the ORD cross member! :eek: I got lucky it didn’t rub through the pan. I am sure 600 lb ft of torque 8.1L didn’t help those mounts any but seriously, they shouldn’t have gone to crap that quickly being they were supposed to be big block mounts.

That all said, if you need a set of engine mounts I recommend getting a set of Energy Suspension inserts and reusing the original metal shells as the aftermarket shells are paper thin garbage. I had to go to the salvage yard to grab a set of original GM mounts to use with the Energy Suspension inserts.

Ouch!
http://farm8.staticflickr.com/7058/6...e67a9f66_z.jpg

http://farm8.staticflickr.com/7058/6...47f13aa1_z.jpg

Junk Napa mounts (I had already taken the nut off before I thought about taking a picture)
http://farm8.staticflickr.com/7067/6...042ef6d7_z.jpg

OEM shells with Energy Suspension inserts vs. Napa big block mount
http://farm8.staticflickr.com/7048/6...342d2116_z.jpg

Much better! To my surprise I don’t feel any engine vibration as you would expect from a Polyurethane mount.
http://farm8.staticflickr.com/7194/6...9c14255c_z.jpg

Got plenty of room now.
http://farm8.staticflickr.com/7195/6...903effef_z.jpg

Poor oil pan has some scars on it now. Luckily it didn’t cause a crack or leak.
http://farm8.staticflickr.com/7062/6...86ea1b21_z.jpg

Re: Replacement engine mounts > Beware!
 

its not just the motor mounts for these trucks.. ive had issues with the ones on my mothers didge minivan and my son has had them in his acura tear out too.. guess its all just inferior junk these days

Re: Replacement engine mounts > Beware!
 

I used the Energy Suspension mounts in the original clamshells and they've held up well to years of a 383 with a rough idling cam. Also have their transmission mount too and no problems so far.

Re: Replacement engine mounts > Beware!
 

hmm that sucks, good thing you noticed when you did, got a question thow how do you put the energy suspention ones in the stock shell

Re: Replacement engine mounts > Beware!
 

That's not looking too good for me then, I just put new motor mounts in my '78 back in September from AutoZombie. Hopefully they last for a few years but I guess a man can dream lol.

Re: Replacement engine mounts > Beware!
 

I find myself asking myself more and more these days: Why the hell do they EVEN make this stuff? A: cuz you'll buy at least one before you find out its crap, $$ made. that and most people probably dont even notice it's crap.

My best case in point is aftermarket 77-80 manual window crank handles (Black plastic). been through about 12 of em in 3 years and I only have 2 doors. finally got the metal ones from a 76 and earlier truck and they dont strip out but the handle snaps off of the round part, or the rivet for the spinning knob shears off. Total crap. I'd pay the price for NOS if I could find them.

Re: Replacement engine mounts > Beware!
 

I went with energy's also, the replacement ones I was going use look like they would bust after a few hard launches

Re: Replacement engine mounts > Beware!
 

Just drill the rivet out of the OEM shells in order to open them and remove the old rubber insert. You really don’t need to rivet them back together, just put them in the truck loose and the bolts that hold them to the frame also hold them together.

Kenny, I agree. To your point on the plastic window cranks, I too went through a few aftermarket ones until I finally grabbed a few OEM cranks from the bone yard. The bone yard crank is still working fine and I have 2 spare OEM cranks left. The Dorman (HELP!) window cranks are a waist if time.

Re: Replacement engine mounts > Beware!
 

Problem with napa 'balkamp' mounts is they have switched vendors twice in the last few years. Nobody is making good mounts anymore, unless you get the energy, those are great. Unfortunatly the napa ones are just dorman reboxed. The vendor before dorman (mounts wise) was decent, but we havent had mounts from them in a few years now.

Re: Replacement engine mounts > Beware!
 

Good to know, I will be buying a set from energy suspension.

Also the Dorman HELP 84+ turn signal/ wiper lever is junk. I bought one and had to cut 1/8" off the end of the metal rod then pull the plastic handle off the rod, install it in the column, then epoxy the handle back on the rod.

Re: Replacement engine mounts > Beware!
 

Whenever I have this problem I always say "Welcome to walmart" < not capitalized on purpose.

Re: Replacement engine mounts > Beware!
 

Polygraphite bushings work great too!! They don't squeal like poly. Soft like rubber. Sturdy and black.

Re: Replacement engine mounts > Beware!
 

Where is everyone getting these inserts? Specifically for the 67-72 models. I've seen them from 75 and up and different chevy models, but nothing for C10'

Just realized that this is in the 73-87 forum.

Disregard please

Re: Replacement engine mounts > Beware!
 

I bet these are nice quality

http://www.summitracing.com/parts/na...olet/model/c10

But who can afford them, GEEZ