The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - another cluster question (https://67-72chevytrucks.com/vboard/showthread.php?t=510003)

MARIOS68PANEL

02-19-2012 11:49 PM

another cluster question

My vac / tach gauge cluster has a tandom lock idiot light on the fuel gauge side. Please forgive a rookie question, but whats that for?

too much stuff

02-19-2012 11:58 PM

Re: another cluster question

That would be out of a c-40 to c-60... same as the vac gauge.

Livrat

02-19-2012 11:59 PM

Re: another cluster question

Your cluster came out of a medium duty truck.. C40/C50/C60 or at least the fuel gauge did.
That light was to indicate the tandem axle was locked in.

MARIOS68PANEL

02-20-2012 12:20 AM

Re: another cluster question

Ok, So its a waist to have it in my truck, At most I need a tach cluster.But could do with just the amp/oil setup
I am thinking I should sell this one and buy a gauge cluster that makes sence.
what should I ask for this one?

Livrat

02-20-2012 12:23 AM

Re: another cluster question

that one should bring around $250 or so as is.. but all you need is to change the speedometer and add a tach lense and your good to go..

MARIOS68PANEL

02-20-2012 12:26 AM

Re: another cluster question

Quote:

Originally Posted by Livrat (Post 5199754)

that one should bring around $250 or so as is.. but all you need is to change the speedometer and add a tach lense and your good to go..

Good Idea.

DaHos

02-20-2012 02:47 PM

Re: another cluster question

Quote:

Originally Posted by Livrat (Post 5199754)

that one should bring around $250 or so as is.. but all you need is to change the speedometer and add a tach lense and your good to go..

Did you mean to say to change the FUEL gauge not speedo?

I too was wondering on swapping tandem/overspeed lens for the brake/temp unit, is the circuit set up to work with either?

Livrat

02-20-2012 03:41 PM

Re: another cluster question

Oops!! My bad, yes I meant change the fuel gauge
Posted via Mobile Device

All times are GMT -4. The time now is 12:40 AM.