Wheel size
 

Will I need to narrow the rear end og n 84 silverado with stock diferential if I put some 22x12...thnx in advance
Posted via Mobile Device

Re: Wheel size
 

Anyone...
Posted via Mobile Device

Re: Wheel size
 

I think you will, I have 22x10 and they barely fit. but I am not 100% sure

Re: Wheel size
 

Do urs tuck in?cuz im plannin on a static drop n not sure uf they have clearance
Posted via Mobile Device

Re: Wheel size
 

yeah my truck lays frame. but when it had the 7 inch drop in the rear the tires almost rubbed the inside of the inner fender.

Re: Wheel size
 

o ok...did u cut in the inner fender of the bed or u diidnt mess with that
Posted via Mobile Device

Re: Wheel size
 

How much static drop? What tire size?
My bet is you'll need to slightly enlarge the wheel-tubs (mini-tubs) for a 12" wheel w/anything more than 5" of rear drop.

Re: Wheel size
 

Mayb 7/11...n I really dont kno of the tires yet...still debatin
Posted via Mobile Device

Re: Wheel size
 

7" front 'static' drop? Yikes.... That's also a heck of a difference front to rear (normally it's a 2" difference). 11" rear drop will definitely require modifications to the bed and/or rear housing depending on how much wheel lip you want.

Re: Wheel size
 

Yea...im gettin ready to spend some cash on the modifications ima need lol
Posted via Mobile Device

Re: Wheel size
 

7" drop in the front with 22" you might have a ruff time making turns.......If you havent already, put 22" on before you drop it anymore and see where your at

Re: Wheel size
 

Its gonna b a 20 22 combo
Posted via Mobile Device

Re: Wheel size
 

my 20's rubbed when i would make fast or real sharp turns with a 4" drop

Re: Wheel size
 

U think ima really need bags
Posted via Mobile Device

Re: Wheel size
 

I was lookin at ur build thread n are u runnin 22s right now?if so wat tires u runnin
Posted via Mobile Device

Re: Wheel size
 

what do you got on there now for rims and tires and what is done to the front to lower it now and what were yo thinking of doing to lowering it more