The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   HELP! I need some input on this one folks... (https://67-72chevytrucks.com/vboard/showthread.php?t=511824)

Bartenfeld 03-01-2012 01:40 AM

HELP! I need some input on this one folks...
 
I recently started a build on a 65 stepside. I am running a 350 with a HM290 5 speed trans. It has a hydro clutch setup. I mounted the clutch master cylinder on the firewall beside the brake master cylinder, considering I have to use the clutch pedal assembly to actuate the clutch master cylinder. However, after installing the clutch master clinder I took a step back to observe my work, and started thinking...I have plans to do a power disc conversion but the clutch master is so close to the brake master that I now have concerns that I will not be able to fit in a brake booster when I do the disc conversion.

My question - Is anybody running a hydro clutch setup with power disc brakes? If so, what type of clutch master cylinder did you use and where/how did you mount it?

I may have overlooked another thread about this topic, if someone could PLEASE just point me in the right direction I would really appreciate it!

62-One-Ton 03-01-2012 01:59 AM

Re: HELP! I need some input on this one folks...
 
Captin fab sells a kit for just this. Looks top notch. Im sure he'll chime in.
Posted via Mobile Device

losthope 03-01-2012 03:08 AM

Re: HELP! I need some input on this one folks...
 
I think its in this thread scroll through it and look, or PM captainfab:
http://www.67-72chevytrucks.com/vboa...=1#post3257836

Captainfab 03-02-2012 01:29 AM

Re: HELP! I need some input on this one folks...
 
Here is what I offer for the '60-'62's

http://www.67-72chevytrucks.com/vboa...d.php?t=362375

I have plans to offer one for the '63-'66's but I just haven't had the time to put one together yet. I have the parts just no time yet. Let me know if you're interested.


All times are GMT -4. The time now is 02:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com