The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   CA 1971-1972 Coil Spring 5 Lug 12 Bolt (https://67-72chevytrucks.com/vboard/showthread.php?t=514638)

sighlurr 03-16-2012 06:59 PM

1971-1972 Coil Spring 5 Lug 12 Bolt
 
I'm looking for a 12 bolt from a 1971 or 1972 1/2 ton coil spring truck with 5 lug axles.

Let me know what you have.

925 979.8161 - call or text
Posted via Mobile Device

WETOWM 03-16-2012 07:18 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
I have 1 i just pulled from a 72 i am parting not sure of gear ratio looks all original and not rusted or pitted

sighlurr 03-16-2012 08:19 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
Quote:

Originally Posted by WETOWM (Post 5255915)
I have 1 i just pulled from a 72 i am parting not sure of gear ratio looks all original and not rusted or pitted

I'm assuming shipping from MO to CA would be more expensive than the rearend...
Posted via Mobile Device

WETOWM 03-16-2012 09:50 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
I thing it would i guess you can check some truck line prices ?

HeavyMetalChevy 03-16-2012 09:52 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
Quote:

Originally Posted by WETOWM (Post 5256184)
I thing it would i guess you can check some truck line prices ?

I can have it shipped very cheap!!! Just need weight and dimensions...
Note: Rear ends weight substantially more than what most people assume... 300-400 lbs depending on make...

HeavyMetalChevy 03-16-2012 09:57 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
from st. Louis to Walnut Creek, CA @ 400lbs $183.42... I think 12 bolts are more like 300 lbs though...

HeavyMetalChevy 03-16-2012 10:00 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
I just got palletized weight of 230 lbs... anyone help??? Got it from google...If that is the case it will be SUPER CHEAP to ship!

HotRod C/10 03-16-2012 10:16 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
thats what I came up with.

teeitup 03-16-2012 10:17 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
I've got like 8 of them out there

sighlurr 03-16-2012 10:36 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
Quote:

Originally Posted by WETOWM (Post 5255915)
I have 1 i just pulled from a 72 i am parting not sure of gear ratio looks all original and not rusted or pitted

Can you send me some pictures? Also, can you pull the cover for the gears?

HeavyMetalChevy 03-16-2012 10:43 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
Quote:

Originally Posted by dsigh (Post 5256297)
Can you send me some pictures? Also, can you pull the cover for the gears?

$159.62 @ 230 lbs

sighlurr 03-16-2012 10:45 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
Quote:

Originally Posted by HeavyMetalChevy (Post 5256311)
$159.62 @ 230 lbs

Good to know, thanks for your help. We may be able to shave some more weight too, because I won't need to drum brake setup on either side.

Stay tuned..

HotRod C/10 03-16-2012 10:46 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
its getting more affordable by the minute..........

HeavyMetalChevy 03-16-2012 10:49 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
Quote:

Originally Posted by DSALRAM (Post 5256320)
its getting more affordable by the minute..........

Hah Hah... Yep... It's what I do... That was still from St. Louis too. Randy is quite a few inches closer.. lol

HotRod C/10 03-16-2012 10:54 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
im 1200 miles closer, :-)

teeitup 03-16-2012 11:10 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
Duane, would it fit on a pallet without hanging over? THANKS for all your help!!!!!!!! Randy

HeavyMetalChevy 03-16-2012 11:25 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
Quote:

Originally Posted by teeitup (Post 5256367)
Duane, would it fit on a pallet without hanging over? THANKS for all your help!!!!!!!! Randy

I just had a cab shipped on one pallet...found it does not matter as long as it is palletized... sweet

teeitup 03-16-2012 11:28 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
WOW good to know, THANKS man!!!!!!!

HeavyMetalChevy 03-16-2012 11:39 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
Quote:

Originally Posted by teeitup (Post 5256402)
WOW good to know, THANKS man!!!!!!!

yes... I am working on getting those doors, that clip, a cab in Nevada(got that sold) and just purchased a 67 cab and front clip in Cali... lol what am I doing??? :uhmk:

HotRod C/10 03-17-2012 12:05 AM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
i looked a t a rust free cab today if interested has doors gauge cluster and the seat. 700.00

HeavyMetalChevy 03-17-2012 12:56 AM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
Quote:

Originally Posted by DSALRAM (Post 5256482)
i looked a t a rust free cab today if interested has doors gauge cluster and the seat. 700.00

then the ship cost would kill it.. .I am in Indiana

sighlurr 03-23-2012 11:42 PM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
Got a rearend locally. Thanks though for all of your help.
Posted via Mobile Device

shawno72 03-24-2012 12:26 AM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
Quote:

Originally Posted by dsigh (Post 5271257)
Got a rearend locally. Thanks though for all of your help.
Posted via Mobile Device

Think you can find another? We're pretty close? :lol:
Posted via Mobile Device

sighlurr 03-24-2012 01:06 AM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
I've got a factory posi 6 lug rearend out of a '70 leaf spring truck..
Posted via Mobile Device

shawno72 03-24-2012 08:48 AM

Re: 1971-1972 Coil Spring 5 Lug 12 Bolt
 
What are looking to get for it?
Posted via Mobile Device


All times are GMT -4. The time now is 10:55 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com