Anybody Run 17" FJ Cruiser Steel Wheels?
 

They look like the offset if pretty good; from what I could find they are 4.5 b/s inches on a 7.5" wide wheel. The center opening looks like it would have no problem clearing our truck's hubs. It also looks like the rims could be reversed for ~3.5" backspacing on the rear for a wider lip. Anybody got pics of them mounted on a truck?


http://i148.photobucket.com/albums/s...2012/004-1.jpg

http://i148.photobucket.com/albums/s...2012/007-1.jpg

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

tcb-1 I think use to run those now that im thinking about it. Let me dig around.

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

Curious as well
Posted via Mobile Device

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

Pic dont show up.
http://67-72chevytrucks.com/vboard/s...d.php?t=393494

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

I saw his ad when I did a search yesterday, too bad the pics aren't up anymore!
Posted via Mobile Device

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

I sent him a PM and asked to email me one. Now.... we wait.
I think doing the small tabs on them so that you could mount an old dog dish would look killer!!

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

Wait I have one saved from my new logo idea!! Muhahahahahahah!!

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

I like that now just to find a way to mount a hubcap.....

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

Check out the way Delmo does it on his billet wheels that he did on a couple trucks. It should work on this one two.

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

Me like! Will have to keep an eye on craigslist for a set.

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

i have a 2006 toyota tundra and replaced stock wheels. i measured the stock wheels and could not find anythig that would make them not fit. 4 1/2 back spaceing and the center hole was about 1/4 in. bigger than the wheels i have on mine.i did not mount them thow.

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

I thought the Nissan Titan wheels worked well on these too?

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

They can be made to work if you use spacers but there's way too much backspacing for them to just bolt on. The center opening isn't big enough to clear the hubs either. Another thing is, I don't think they look right without any lip- the centers come nearly all the way to the outside edge of the rim.

The backspacing and larger center opening should make FJ wheels bolt right up.
Posted via Mobile Device

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

I have a set of wheels from the 90s that I bought to use the tires for my DD. They had been on a toyota but the wheels fit our trucks as well. Funny that Toyota has such big hubs, even still.
Posted via Mobile Device

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

Fit great

http://i176.photobucket.com/albums/w...Picture023.jpg

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

bob-n do those fit with drums?

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

Yes. I've had them on with drums and disks.. No problem at all. They look much better on it in person. If you were closer I'd probably make ya a deal on them!
Posted via Mobile Device

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

Damn! i love the look of those steelies too lol.what size tire are you running on those 17's
Posted via Mobile Device

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

I really can't remember, I took them off to put other wheels on. I think something like 245/45? 55? If I get a chance to swing by my storage bin I'll look
Posted via Mobile Device

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

Running the FJ wheels with an early 90's Chevy Center Cap on my '65. No spacers. Tires are 245/45 R17.

http://i608.photobucket.com/albums/t...ps1c37758a.jpg

http://i608.photobucket.com/albums/t...pse1acebef.jpg
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

i am running a set still trying to find the right size of tires i like. took me a few months to find a set on craigslist easy to find the aluminum ones the steels only came on base models. i work at a Toyota dealership and at my cost new the are over 200 a piece found set on craigs for $250
https://sphotos-a.xx.fbcdn.net/hphot..._5805024_o.jpg

https://sphotos-b.xx.fbcdn.net/hphot..._4854751_o.jpg

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

I wonder if wheel vintiques trim rings would fit these wheels? That'd look nice
Posted via Mobile Device

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

I can say for sure the titans will not work. at least on the front with stock drums.

Re: Anybody Run 17" FJ Cruiser Steel Wheels?
 

There is a set of 17 steelies posted on the 60-66 parta board