'84 k30 cummins swap build pics
 

still have a long way to go.....http://http://s1070.photobucket.com/.../krwright0313/

Re: '84 k30 cummins swap build pics
 

Re: '84 k30 cummins swap build pics
 

Very nice swap and welcome to the truck board!

Re: '84 k30 cummins swap build pics
 

Looks good so far did you make that engine crossmember ?

Re: '84 k30 cummins swap build pics
 

Yea I made it.
Posted via Mobile Device

Re: '84 k30 cummins swap build pics
 

Copy the crossmember and sell it!! You can make some nice $$$$. :metal:

Nice work!!

Re: '84 k30 cummins swap build pics
 

i like the rocker cover. where did you get it or did you make that as well?

Re: '84 k30 cummins swap build pics
 

I made the over too
Posted via Mobile Device

Re: '84 k30 cummins swap build pics
 

Thanks. I found a cross member from a company making swap kits ( avalanche engineering i think)they wanted 800$!!!! They sent me a pic and it's just a piece 3/16 plate with 2 bends!! That's nothing but pure taking advantage of people. I made this for 17$.
Posted via Mobile Device

Re: '84 k30 cummins swap build pics
 

avalanche engineering went under there is two more places that make one but not as pricey as they was.

Re: '84 k30 cummins swap build pics
 

Auto world has a nice cross member for these trucks. Way nicer than the avalanche one by far.

Re: '84 k30 cummins swap build pics
 

Yeah i like auto world one too other option is http://www.tndieselpower.com/site/pr...ember-package/

Re: '84 k30 cummins swap build pics
 

I used autoworld mounts. That's not a bad price for the mount and member kit. I believe my mounts were around 300$. But I made a template for next time.
Posted via Mobile Device

Re: '84 k30 cummins swap build pics
 

I build my own brackets but use auto world's poly mounts. Do you plan to do anything to the engine while it's out? KDP fixed?

Re: '84 k30 cummins swap build pics
 

I bought the whole truck that was totaled. The motor has a ton of stuff done to it injectors, pump work, delivery valves, hybrid turbo, head studs, cam, timing, flywheel, low stall converter, tranny valve body and shafts. It made several ponies in his truck and would honestly black out both lanes of the interstate. The kdp struck him a few years ago.
Posted via Mobile Device

Re: '84 k30 cummins swap build pics
 

you may have posted...but,i didn't see it..........what cummins is that ?
looks good so far

Re: '84 k30 cummins swap build pics
 

I'm fitting the intercooler today did u use the dodge? That's what I'm doing and it fits pretty sweet when I flip it upside down and not much cutting. Did u leave the brace out for the hood latch? It's weak as hell without it but nowhere to mount it with the cooler in the way
Posted via Mobile Device

Re: '84 k30 cummins swap build pics
 

It's a p pump
Posted via Mobile Device

Re: '84 k30 cummins swap build pics
 

I flipped my intercooler upside down. I also left the bracket and the safety latch out.

Re: '84 k30 cummins swap build pics
 

Got the intercooler mounted today. I have an Idea I want to run by everybody. I have 2 3/4 inches between the radiator and intercooler. If I mount the fan in front of the radiator and wire it to push will it still draw enough air for the intercooler? I'm keeping the engine compartment as clean as possible by hiding everything wiring, batteries etc. just thought that would be great to even hide the fan.

http://s1070.photobucket.com/albums/u493/krwright0313/
Posted via Mobile Device

Re: '84 k30 cummins swap build pics
 

It could but I generally mount them on the engine side so the fans don't over heat. Usually there isn't room to mount them in front. By the way, where you have that breather on your vacuum pump is actually your outlet for the vacumm accessories.

Re: '84 k30 cummins swap build pics
 

Yea I know I'm not running any vacuum on anything. Using hydro boost. Didn't know what else to put on it to keep the dirt out.
Posted via Mobile Device

Re: '84 k30 cummins swap build pics
 

Are any of your a/c controls vacuum? Or does your truck have no a/c?

Re: '84 k30 cummins swap build pics
 

No a/c.
Posted via Mobile Device

Re: '84 k30 cummins swap build pics
 

I just got done cutting the supports on the inside of the core support out, so the intercooler is now sitting in there, right in front of the radiator. that way I don't have to trim the grille this time.
only thing I would do different on the crossmember is make it removeable from the bottom. I didnt' on my last one, and had to cut it in two to get the oilpan off, so its getting rebuilt differently this time around.