The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)

- - WI '66 stuff, stock and aftermarket (https://67-72chevytrucks.com/vboard/showthread.php?t=528487)

'66 stuff, stock and aftermarket

UPDATED 3/2/13

All prices + shipping, will combo some stuff. Offers welcome but be reasonable. Located in 53217, Milwaukee WI

I have a couple new things to throw on the list that don't have pictures yet.
A set of LQ4 stock injectors, all in good shape and working
A few extra step up diodes (the ones you use to run a regular tach on an LS swap)
A pile of Air Ride fittings, LOTS, let me know what you need
An extra set of AN to Push-to-Connect fittings (3/8 and 5/16 old design)
2 Sets of Hose bard to Push-to-Connect fittings in 3/8 and 5/16

Fuse panel, $10?
http://i112.photobucket.com/albums/n...ljay/026-1.jpg

K&N Filter for carb applications, couple years old, material is still in good shape. Comes with spin-on retainer for the carb stud. $35
http://i112.photobucket.com/albums/n...eeljay/043.jpg
http://i112.photobucket.com/albums/n...eeljay/045.jpg

Stainless steel full length true dual exhaust for a 66 short step with a small block. Exits out the back. Main flanges are not stainless, but the rest is tig welded stainless. Designed for use with bullet style mufflers (14-18") . Because of the size and weight, I'm open to offers, but keep in mind shipping costs if you are out of state. I can get more pics, its currently stored and I could only catch the ends.
http://i112.photobucket.com/albums/n...eeljay/052.jpg
http://i112.photobucket.com/albums/n...eeljay/051.jpg
http://i112.photobucket.com/albums/n...eeljay/053.jpg

Stainless gauge panel. Circle punched for a tach in the center. Fits into the back of the gauge bezel with screws and washers, or epoxy/glue it. Its homemade and not perfect, but works for what it does. I have one in my truck, made 2. Can be added to easily. ?$10 I guess idk
http://i112.photobucket.com/albums/n...ljay/009-9.jpg

LQ4 pushrods 7.4" all in good shape, no damage $25
http://i112.photobucket.com/albums/n...eeljay/050.jpg

LQ4 stock oil pan, windage tray and pickup tube. All in good shape, and I think I have a full set of bolts for the oil pan which will come with if you want. No damage, just some light overspray, as it was painted with my block. $45
http://i112.photobucket.com/albums/n...eeljay/041.jpg

Jumper harness to extend TAC Module and pedal. Came with my harness, but I didn't need the extra length. Make an offer
http://i112.photobucket.com/albums/n...eeljay/039.jpg

Injector clips for Multec II Injectors, no pigtail, full set $10
http://i112.photobucket.com/albums/n...ljay/008-7.jpg

B&M Floor shifter for 4-speed Automatics....customized for use in 60-66 trucks with 4l80e/4l60e/700r4 Includes bracket, NSS and hardware. $115 obo
This shifter has a ~30* bend on the shifter arm to provide a better hand position and leg clearance when installed in a 60-66 truck. I made a removable and changeable shifter arm extension, which uses the same threading as the original handle to allow for a changeable length, throw and hand-height (included). It also allows you to use the stock T shifter handle (included but not pictured), or any other shifter handle tapped for the stock style threading. This was in an ls-swapped truck with a 4l80e.
http://i112.photobucket.com/albums/n...ljay/002-2.jpg
http://i112.photobucket.com/albums/n...ljay/003-2.jpg
http://i112.photobucket.com/albums/n...ljay/004-2.jpg
http://i112.photobucket.com/albums/n...ljay/005-2.jpg
http://i112.photobucket.com/albums/n...ljay/006-3.jpg
http://i112.photobucket.com/albums/n...ljay/007-2.jpg