WI '66 stuff, stock and aftermarket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BR3W CITY · 06-08-2012, 06:29 PM

UPDATED 3/2/13

All prices + shipping, will combo some stuff. Offers welcome but be reasonable. Located in 53217, Milwaukee WI

I have a couple new things to throw on the list that don't have pictures yet.
A set of LQ4 stock injectors, all in good shape and working
A few extra step up diodes (the ones you use to run a regular tach on an LS swap)
A pile of Air Ride fittings, LOTS, let me know what you need
An extra set of AN to Push-to-Connect fittings (3/8 and 5/16 old design)
2 Sets of Hose bard to Push-to-Connect fittings in 3/8 and 5/16

Fuse panel, $10?

K&N Filter for carb applications, couple years old, material is still in good shape. Comes with spin-on retainer for the carb stud. $35

Stainless steel full length true dual exhaust for a 66 short step with a small block. Exits out the back. Main flanges are not stainless, but the rest is tig welded stainless. Designed for use with bullet style mufflers (14-18") . Because of the size and weight, I'm open to offers, but keep in mind shipping costs if you are out of state. I can get more pics, its currently stored and I could only catch the ends.

Stainless gauge panel. Circle punched for a tach in the center. Fits into the back of the gauge bezel with screws and washers, or epoxy/glue it. Its homemade and not perfect, but works for what it does. I have one in my truck, made 2. Can be added to easily. ?$10 I guess idk

LQ4 pushrods 7.4" all in good shape, no damage $25

LQ4 stock oil pan, windage tray and pickup tube. All in good shape, and I think I have a full set of bolts for the oil pan which will come with if you want. No damage, just some light overspray, as it was painted with my block. $45

Jumper harness to extend TAC Module and pedal. Came with my harness, but I didn't need the extra length. Make an offer

Injector clips for Multec II Injectors, no pigtail, full set $10

B&M Floor shifter for 4-speed Automatics....customized for use in 60-66 trucks with 4l80e/4l60e/700r4 Includes bracket, NSS and hardware. $115 obo
This shifter has a ~30* bend on the shifter arm to provide a better hand position and leg clearance when installed in a 60-66 truck. I made a removable and changeable shifter arm extension, which uses the same threading as the original handle to allow for a changeable length, throw and hand-height (included). It also allows you to use the stock T shifter handle (included but not pictured), or any other shifter handle tapped for the stock style threading. This was in an ls-swapped truck with a 4l80e.

lucifer · 06-08-2012, 07:10 PM

Please price shipping to 32174 for the gauge cluster

If you can do 75.00 shipped I will take it.

thanx
scott

**ScottH** · 06-08-2012, 11:32 PM

Interested in the air cleaner shipped to 08753. Also would u sell just the mounting bracket shown in pic with the oil pressure gauge? I dont need the gauge but could use a single gauge mounting bracket.

Thanks
Scott

Rayo · 06-09-2012, 12:56 PM

Intrested in the Wiper Switch with knob how much shipped to Cali 92105

Rayo · 06-09-2012, 12:57 PM

Do you have the original choke cable and knob?

BR3W CITY · 06-09-2012, 05:33 PM

Everyone should have PM's from me.

BR3W CITY · 06-10-2012, 02:36 PM

Gauge cluster SOLD! Thanks!

BR3W CITY · 06-13-2012, 11:48 PM

Ttt..

BR3W CITY · 06-16-2012, 07:30 PM

Gauge mount sold, thanks!
Items added.

BR3W CITY · 06-17-2012, 09:57 PM

Gas Pedal sold, thanks!

BR3W CITY · 06-20-2012, 12:55 AM

Bumper Added!

BR3W CITY · 06-24-2012, 01:31 AM

Bump, I need to get painted so lets get this stuff sold!

J.Cagle · 06-24-2012, 11:26 AM

How much to get the bumper shipped to 67341 in kansas? Might be waaay more than its worth. Thanks, Jared

BR3W CITY · 06-26-2012, 03:01 PM

I can ship it through my pop's Fedex account; it would be roughly $34 to do it to a residential address. If you have a biz address I might be able to do a bit better.

BR3W CITY · 07-01-2012, 08:26 PM

Lets go people! I just bought my paint, and I might have a blower on the way....lets sell sell sell this stuff!

LostMy65 · 07-01-2012, 09:02 PM

Do you have pics of the bumper brackets?
Posted via Mobile Device

niterider65 · 07-02-2012, 09:28 PM

I would like the bumper if lost my 65 ?found it again passes on the bumper
Thanks
Bill

LostMy65 · 07-02-2012, 09:31 PM

LostMy65 but FoundItAgain passes on the bumper..

Posted via Mobile Device

BR3W CITY · 07-02-2012, 11:48 PM

Lostmy65, did you still need the bracket pics or are you saying you are out?

Niterider, you are interested in the bumper?

LostMy65 · 07-03-2012, 12:12 AM

I was just thinking I might be interested in just the brackets if you would of been willing to separate. If niterider65 wants the bumper with the brackets, I step out.
Thanks

BR3W CITY · 07-05-2012, 05:07 PM

Bumper is SOLD!
Lostmy65- the brackets went with the bumper, sorry.

BR3W CITY · 07-12-2012, 01:08 PM

New items added!

shawno72 · 07-12-2012, 01:36 PM

Would you do $25 shipped on the air cleaner?

villa 66 · 07-12-2012, 07:02 PM

I'll take the shift indicator. How would you like too get payed, paypal? My email is noekeareb3@live.com

MikeS. · 07-12-2012, 07:21 PM

How much for the wiper switch? Do you still have the chrome breather?

Thanks.

06-08-2012, 06:29 PM	#1
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	'66 stuff, stock and aftermarket UPDATED 3/2/13 All prices + shipping, will combo some stuff. Offers welcome but be reasonable. Located in 53217, Milwaukee WI I have a couple new things to throw on the list that don't have pictures yet. A set of LQ4 stock injectors, all in good shape and working A few extra step up diodes (the ones you use to run a regular tach on an LS swap) A pile of Air Ride fittings, LOTS, let me know what you need An extra set of AN to Push-to-Connect fittings (3/8 and 5/16 old design) 2 Sets of Hose bard to Push-to-Connect fittings in 3/8 and 5/16 Fuse panel, $10? K&N Filter for carb applications, couple years old, material is still in good shape. Comes with spin-on retainer for the carb stud. $35 Stainless steel full length true dual exhaust for a 66 short step with a small block. Exits out the back. Main flanges are not stainless, but the rest is tig welded stainless. Designed for use with bullet style mufflers (14-18") . Because of the size and weight, I'm open to offers, but keep in mind shipping costs if you are out of state. I can get more pics, its currently stored and I could only catch the ends. Stainless gauge panel. Circle punched for a tach in the center. Fits into the back of the gauge bezel with screws and washers, or epoxy/glue it. Its homemade and not perfect, but works for what it does. I have one in my truck, made 2. Can be added to easily. ?$10 I guess idk LQ4 pushrods 7.4" all in good shape, no damage $25 LQ4 stock oil pan, windage tray and pickup tube. All in good shape, and I think I have a full set of bolts for the oil pan which will come with if you want. No damage, just some light overspray, as it was painted with my block. $45 Jumper harness to extend TAC Module and pedal. Came with my harness, but I didn't need the extra length. Make an offer Injector clips for Multec II Injectors, no pigtail, full set $10 B&M Floor shifter for 4-speed Automatics....customized for use in 60-66 trucks with 4l80e/4l60e/700r4 Includes bracket, NSS and hardware. $115 obo This shifter has a ~30* bend on the shifter arm to provide a better hand position and leg clearance when installed in a 60-66 truck. I made a removable and changeable shifter arm extension, which uses the same threading as the original handle to allow for a changeable length, throw and hand-height (included). It also allows you to use the stock T shifter handle (included but not pictured), or any other shifter handle tapped for the stock style threading. This was in an ls-swapped truck with a 4l80e. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD Last edited by BR3W CITY; 03-02-2013 at 08:38 PM.

06-08-2012, 07:10 PM	#2
lucifer Registered User Join Date: Mar 2010 Location: simcoe ontario canada Posts: 681	Re: '66 stuff, stock and aftermarket Please price shipping to 32174 for the gauge cluster If you can do 75.00 shipped I will take it. thanx scott __________________ 65 burb On the road Mar 26th Finally

06-08-2012, 11:32 PM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: '66 stuff, stock and aftermarket Interested in the air cleaner shipped to 08753. Also would u sell just the mounting bracket shown in pic with the oil pressure gauge? I dont need the gauge but could use a single gauge mounting bracket. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

06-09-2012, 12:56 PM	#4
Rayo Registered User Join Date: Jul 2010 Location: san diego Posts: 81	Re: '66 stuff, stock and aftermarket Intrested in the Wiper Switch with knob how much shipped to Cali 92105

06-09-2012, 12:57 PM	#5
Rayo Registered User Join Date: Jul 2010 Location: san diego Posts: 81	Re: '66 stuff, stock and aftermarket Do you have the original choke cable and knob?

06-09-2012, 05:33 PM	#6
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: '66 stuff, stock and aftermarket Everyone should have PM's from me. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

06-10-2012, 02:36 PM	#7
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: '66 stuff, stock and aftermarket Gauge cluster SOLD! Thanks! __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

06-13-2012, 11:48 PM	#8
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: '66 stuff, stock and aftermarket Ttt.. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

06-16-2012, 07:30 PM	#9
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: '66 stuff, stock and aftermarket Gauge mount sold, thanks! Items added. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

06-17-2012, 09:57 PM	#10
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: '66 stuff, stock and aftermarket Gas Pedal sold, thanks! __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

06-20-2012, 12:55 AM	#11
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: '66 stuff, stock and aftermarket Bumper Added! __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

06-24-2012, 01:31 AM	#12
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: '66 stuff, stock and aftermarket Bump, I need to get painted so lets get this stuff sold! __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

06-24-2012, 11:26 AM	#13
J.Cagle Registered User Join Date: Jun 2011 Location: Dennis Kansas Posts: 335	Re: '66 stuff, stock and aftermarket How much to get the bumper shipped to 67341 in kansas? Might be waaay more than its worth. Thanks, Jared __________________ 1964 c-10 Long stepside, 230 I6 ,3spd, dealer add-on air.

06-26-2012, 03:01 PM	#14
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: '66 stuff, stock and aftermarket I can ship it through my pop's Fedex account; it would be roughly $34 to do it to a residential address. If you have a biz address I might be able to do a bit better. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

07-01-2012, 08:26 PM	#15
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: '66 stuff, stock and aftermarket Lets go people! I just bought my paint, and I might have a blower on the way....lets sell sell sell this stuff! __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD



Register or Log In To remove these advertisements.

07-01-2012, 09:02 PM	#16
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: '66 stuff, stock and aftermarket Do you have pics of the bumper brackets? Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

07-02-2012, 09:28 PM	#17
niterider65 Registered User Join Date: Jun 2011 Location: colleyville tx Posts: 624	Re: '66 stuff, stock and aftermarket I would like the bumper if lost my 65 ?found it again passes on the bumper Thanks Bill

07-02-2012, 09:31 PM	#18
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: '66 stuff, stock and aftermarket LostMy65 but FoundItAgain passes on the bumper.. Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

07-02-2012, 11:48 PM	#19
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: '66 stuff, stock and aftermarket Lostmy65, did you still need the bracket pics or are you saying you are out? Niterider, you are interested in the bumper? __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

07-03-2012, 12:12 AM	#20
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: '66 stuff, stock and aftermarket I was just thinking I might be interested in just the brackets if you would of been willing to separate. If niterider65 wants the bumper with the brackets, I step out. Thanks __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

07-05-2012, 05:07 PM	#21
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: '66 stuff, stock and aftermarket Bumper is SOLD! Lostmy65- the brackets went with the bumper, sorry. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

07-12-2012, 01:08 PM	#22
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: '66 stuff, stock and aftermarket New items added! __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

07-12-2012, 01:36 PM	#23
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: '66 stuff, stock and aftermarket Would you do $25 shipped on the air cleaner? __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

07-12-2012, 07:02 PM	#24
villa 66 Registered User Join Date: May 2009 Location: MERCEDES,TEXAS Posts: 146	Re: '66 stuff, stock and aftermarket I'll take the shift indicator. How would you like too get payed, paypal? My email is noekeareb3@live.com

07-12-2012, 07:21 PM	#25
MikeS. Registered User Join Date: Sep 2011 Location: FarEastern WVa Posts: 1,691	Re: '66 stuff, stock and aftermarket How much for the wiper switch? Do you still have the chrome breather? Thanks. __________________ Past Master Triluminar Lodge #117 GL of WVa My 1963 4x4 Suburban build; http://67-72chevytrucks.com/vboard/s...d.php?t=531274 My Gallery, now with pics of my 1966 C30 motorhome. http://67-72chevytrucks.com/gallery/...&ppuser=103447

Register or Log In To remove these advertisements.