drop spindles
 

Whats up guys i have a problem with my 4/6 belltech drop kit. I cant find the right berrings for the spindles they r a 3''belltech drop and for 1'' rotors part # 3200 ive been to all the part stores and no luck i got some that fit but when i put the rotor on the spindle it wiggles alot. ive serched the forum and havent found a clear explenation on what i should do has anyone had this problem if so what should i do. Oh and my truck is an 85 chevy swb 1/2 ton

Re: drop spindles
 

It sounds like you might actually have a 1.25in rotors needing the larger bearings, only the inner bearing is different between 1in and 1.25in rotors. You might want to double check the thickness.
Posted via Mobile Device

Re: drop spindles
 

I have the right thckness in rotors 1'' i also tried some 1 1/4'' roters and they were to big

Re: drop spindles
 

I have 3" Belltech #3200 spindles on my truck project with 1" rotors.
I got the bearings at my local parts store.

Re: drop spindles
 

The inner bearing is a A6 bearing for the light duty rotors.
The outer bearing should be A3.

(the HD 1-1/4" rotors take A5 inners and A3 outers)

Re: drop spindles
 

ok thanks man im going to the parts store right now

Re: drop spindles
 

I Went to get the bearings and thoes woint work either they fit the rotor but they dont fit the shaft of the spindel they need to be a little smaller the rotor has to much play and wiggles alot

Re: drop spindles
 

Does it do this on both spindles. Just trying to see if the spindle might be defective.
Posted via Mobile Device

Re: drop spindles
 

Yes it does i tried to call belltech but they r closed till tomorrow

Re: drop spindles
 

Wich ever parts fit your stock spindles should fit perfectly on the drop spindles. It must be the wrong spindles or they are possibly defective.
Posted via Mobile Device

Re: drop spindles
 

yeah thats what i was thinking

Re: drop spindles
 

The last set of Belltech spindles were boxed wrong.
But your spindles should have a number cast into them.
Theyre not 3100 or 3120 spindles are they?
Posted via Mobile Device

Re: drop spindles
 

yeah its on there the number is 3200-302