Crewcab "the rolling resume build"
 

Here is a little something to get your attention...

https://lh3.googleusercontent.com/-H...0/DSCN6390.JPG

https://lh5.googleusercontent.com/-L...0127121728.jpg

https://lh3.googleusercontent.com/-K...0/DSCN6485.JPG

https://lh3.googleusercontent.com/-Q...0/DSCN6491.JPG

https://lh3.googleusercontent.com/-J...0/DSCN6513.JPG

Re: Crewcab "the rolling resume build"
 

nice start

Re: Crewcab "the rolling resume build"
 

I bought this body a while back from a board member with the intent of building a crew cab. It sat at my father-in-laws house until I was back in Cali. I hadn't planned on starting any work on this build until my Suburban was done. But since the burb is sitting in CO, blocked in by construction, and since funding for the trip is building very slowly, it was time for me to get working on another project.

The suburban body was rugged. while I was marking for cutting I inspected every panel that was coming off to see if there was anything that I could sell, and there was NOTHING. This was the roughest body I have seen!

The truck I also got from a board member. This cab is another rough piece. Exterior rust was minimal, but the floor and kick panels were rotted.

The green doors are only on there for measurements!

Re: Crewcab "the rolling resume build"
 

what are the plans? lifted? lowered? full show?

Re: Crewcab "the rolling resume build"
 

4-6 lift depending on looks, long bed on a 77 chevy chassis. Not full show, but since this truck is going to be my rolling business card, I am aiming for flawless. I also plan on getting this truck built as fast as cash flow allows. My brother will be the proud owner. Right now we are looking at a 6BT for it. We have a line on a frame if the price is right.

Re: Crewcab "the rolling resume build"
 

sub'd in cause I love crew cab builds!

Re: Crewcab "the rolling resume build"
 

Well one project if tough. Two is harder. I will watch and see how you do your 4th door. Maybe someday I will work on mine again.
Posted via Mobile Device

Re: Crewcab "the rolling resume build"
 

YYYEEEEAAAAHHHH....... the burb is on hold cuz i don't have the money to go get the ol' girl. Getting this truck done is paying for me to go get it!!!!!! Stay posted. Exciting pictures coming this week!

Re: Crewcab "the rolling resume build"
 

I like exciting pictures.

Re: Crewcab "the rolling resume build"
 

Looks like a great start. wish i could find me a burb but my wife hates them dont ask me why....

Re: Crewcab "the rolling resume build"
 

I travel a bit and everywhere I go I have my eyes wide open 4 an old burb

Re: Crewcab "the rolling resume build"
 

Picture for the week as promised.

YEEEEAAAAHHHH!!!!!

https://lh6.googleusercontent.com/-p...-14-52_686.jpg

Re: Crewcab "the rolling resume build"
 

Thats a good looking beer ya got there...

Re: Crewcab "the rolling resume build"
 

Schweet!

Re: Crewcab "the rolling resume build"
 

One pic a week at least.

Chassis made it's way home.

https://lh6.googleusercontent.com/-Y.../IMG959148.jpg

Re: Crewcab "the rolling resume build"
 

Good looking dually^^^.

Re: Crewcab "the rolling resume build"
 

sorr to hear of the stop order on the 4 door pickemuptruck.

Re: Crewcab "the rolling resume build"
 

There's no stopping on the crew cab, the body is coming off the dual turd. It will get single rear wheel axle and a slight lift.

Re: Crewcab "the rolling resume build"
 

Are the cab dimensions going to be about the same as the square body crew cab?

Re: Crewcab "the rolling resume build"
 

Almost... the bed will be in the square body location, the cab is getting stretched 3 inches in the rear doors, and the front axle will be 1.5 inches forward in the wheel well. The cab floor is getting put together now. It takes a long time to drill out all the spot weld holes with just a drill!

Re: Crewcab "the rolling resume build"
 

https://lh6.googleusercontent.com/-5.../IMG952088.jpg

One more piece of the puzzle.

Re: Crewcab "the rolling resume build"
 

What year NV4500 is that?

Re: Crewcab "the rolling resume build"
 

99 Chevy 4WD

Re: Crewcab "the rolling resume build"
 

hope to see progress real soon

Re: Crewcab "the rolling resume build"
 

Well at this point it doesn't look like much, if not less. I have been extra meticulous on measurements. I also got the roof skin cut off. Now that I have the floor mapped out for what we want, I can build a frame inside to keep everything where I want it. I also stripped down the doors so I can start cutting them up. Once again, I may be going overboard on measurements.

https://lh6.googleusercontent.com/-H...0/DSCN6571.JPG

https://lh3.googleusercontent.com/-H...0/DSCN6593.JPG

https://lh6.googleusercontent.com/-r...0/DSCN6591.JPG

These are out of order, but They should be in here anyway.

https://lh5.googleusercontent.com/-P...0/DSCN6500.JPG

https://lh6.googleusercontent.com/-A...0/DSCN6483.JPG