Crewcab "the rolling resume build" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jbclassix · 07-12-2012, 09:26 PM

Here is a little something to get your attention...

Tinkermc · 07-12-2012, 09:32 PM

nice start

jbclassix · 07-12-2012, 10:28 PM

I bought this body a while back from a board member with the intent of building a crew cab. It sat at my father-in-laws house until I was back in Cali. I hadn't planned on starting any work on this build until my Suburban was done. But since the burb is sitting in CO, blocked in by construction, and since funding for the trip is building very slowly, it was time for me to get working on another project.

The suburban body was rugged. while I was marking for cutting I inspected every panel that was coming off to see if there was anything that I could sell, and there was NOTHING. This was the roughest body I have seen!

The truck I also got from a board member. This cab is another rough piece. Exterior rust was minimal, but the floor and kick panels were rotted.

The green doors are only on there for measurements!

broey · 07-12-2012, 10:31 PM

what are the plans? lifted? lowered? full show?

jbclassix · 07-12-2012, 10:47 PM

Quote:

Originally Posted by broey

what are the plans? lifted? lowered? full show?

4-6 lift depending on looks, long bed on a 77 chevy chassis. Not full show, but since this truck is going to be my rolling business card, I am aiming for flawless. I also plan on getting this truck built as fast as cash flow allows. My brother will be the proud owner. Right now we are looking at a 6BT for it. We have a line on a frame if the price is right.

thor · 08-15-2012, 04:01 PM

sub'd in cause I love crew cab builds!

pickup67man · 09-03-2012, 09:30 PM

Well one project if tough. Two is harder. I will watch and see how you do your 4th door. Maybe someday I will work on mine again.
Posted via Mobile Device

jbclassix · 09-03-2012, 11:12 PM

Quote:

Originally Posted by pickup67man

Well one project if tough. Two is harder. I will watch and see how you do your 4th door. Maybe someday I will work on mine again.
Posted via Mobile Device

YYYEEEEAAAAHHHH....... the burb is on hold cuz i don't have the money to go get the ol' girl. Getting this truck done is paying for me to go get it!!!!!! Stay posted. Exciting pictures coming this week!

mosesburb · 09-03-2012, 11:46 PM

Quote:

Originally Posted by jbclassix

YYYEEEEAAAAHHHH....... the burb is on hold cuz i don't have the money to go get the ol' girl. Getting this truck done is paying for me to go get it!!!!!! Stay posted. Exciting pictures coming this week!

I like exciting pictures.

**68 Four on the Floor** · 09-04-2012, 07:44 PM

Looks like a great start. wish i could find me a burb but my wife hates them dont ask me why....

Tinkermc · 09-05-2012, 11:18 AM

I travel a bit and everywhere I go I have my eyes wide open 4 an old burb

jbclassix · 09-07-2012, 12:01 AM

Picture for the week as promised.

YEEEEAAAAHHHH!!!!!

**68 Four on the Floor** · 09-07-2012, 12:44 AM

Thats a good looking beer ya got there...

MrBeast · 09-07-2012, 01:45 AM

Quote:

Originally Posted by jbclassix

Picture for the week as promised.

YEEEEAAAAHHHH!!!!!

Schweet!

jbclassix · 09-09-2012, 04:52 PM

One pic a week at least.

Chassis made it's way home.

**lolife99** · 09-09-2012, 04:57 PM

Good looking dually^^^.

Tinkermc · 09-09-2012, 05:41 PM

sorr to hear of the stop order on the 4 door pickemuptruck.

jbclassix · 09-09-2012, 05:54 PM

Quote:

Originally Posted by Tinkermc

sorr to hear of the stop order on the 4 door pickemuptruck.

There's no stopping on the crew cab, the body is coming off the dual turd. It will get single rear wheel axle and a slight lift.

hgs_notes · 09-20-2012, 10:25 AM

Are the cab dimensions going to be about the same as the square body crew cab?

jbclassix · 09-20-2012, 10:11 PM

Quote:

Originally Posted by hgs_notes

Are the cab dimensions going to be about the same as the square body crew cab?

Almost... the bed will be in the square body location, the cab is getting stretched 3 inches in the rear doors, and the front axle will be 1.5 inches forward in the wheel well. The cab floor is getting put together now. It takes a long time to drill out all the spot weld holes with just a drill!

jbclassix · 09-21-2012, 06:04 PM

One more piece of the puzzle.

MrBeast · 09-21-2012, 06:39 PM

Quote:

Originally Posted by jbclassix

One more piece of the puzzle.

What year NV4500 is that?

jbclassix · 09-21-2012, 07:07 PM

Quote:

Originally Posted by MrBeast

What year NV4500 is that?

99 Chevy 4WD

Tinkermc · 09-21-2012, 07:53 PM

hope to see progress real soon

jbclassix · 09-23-2012, 01:26 AM

Well at this point it doesn't look like much, if not less. I have been extra meticulous on measurements. I also got the roof skin cut off. Now that I have the floor mapped out for what we want, I can build a frame inside to keep everything where I want it. I also stripped down the doors so I can start cutting them up. Once again, I may be going overboard on measurements.

These are out of order, but They should be in here anyway.

07-12-2012, 09:26 PM	#1
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Crewcab "the rolling resume build" Here is a little something to get your attention... __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

07-12-2012, 09:32 PM	#2
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Crewcab "the rolling resume build" nice start

07-12-2012, 10:28 PM	#3
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Crewcab "the rolling resume build" I bought this body a while back from a board member with the intent of building a crew cab. It sat at my father-in-laws house until I was back in Cali. I hadn't planned on starting any work on this build until my Suburban was done. But since the burb is sitting in CO, blocked in by construction, and since funding for the trip is building very slowly, it was time for me to get working on another project. The suburban body was rugged. while I was marking for cutting I inspected every panel that was coming off to see if there was anything that I could sell, and there was NOTHING. This was the roughest body I have seen! The truck I also got from a board member. This cab is another rough piece. Exterior rust was minimal, but the floor and kick panels were rotted. The green doors are only on there for measurements! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

07-12-2012, 10:31 PM	#4
broey Square Join Date: Feb 2011 Location: Phoenix Arizona Posts: 1,568	Re: Crewcab "the rolling resume build" what are the plans? lifted? lowered? full show? __________________ Squarebody Syndicate

08-15-2012, 04:01 PM	#6
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: Crewcab "the rolling resume build" sub'd in cause I love crew cab builds! __________________ 1972 Chevy Blazer CST.....Project: Polished Turd

09-03-2012, 09:30 PM	#7
pickup67man Registered User Join Date: Jun 2009 Location: Puyallup, WA Posts: 337	Re: Crewcab "the rolling resume build" Well one project if tough. Two is harder. I will watch and see how you do your 4th door. Maybe someday I will work on mine again. Posted via Mobile Device __________________ Travis 2005 K2500 Duramax (hauls the junk home) 1967 Chev C10 (hauls a$$) 1970 Suburban (Yukon XL 4 door) 1968 GMC 3/4 ton (sheetmetal only, chassis gone) 2005 Malibu (wife's car, still a Chevy) Project Family Hauler New Home for Chevys (Moved in and working)

09-04-2012, 07:44 PM	#10
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: Crewcab "the rolling resume build" Looks like a great start. wish i could find me a burb but my wife hates them dont ask me why....

09-05-2012, 11:18 AM	#11
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Crewcab "the rolling resume build" I travel a bit and everywhere I go I have my eyes wide open 4 an old burb

09-07-2012, 12:01 AM	#12
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Crewcab "the rolling resume build" Picture for the week as promised. YEEEEAAAAHHHH!!!!! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

09-07-2012, 12:44 AM	#13
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: Crewcab "the rolling resume build" Thats a good looking beer ya got there...

09-09-2012, 04:52 PM	#15
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Crewcab "the rolling resume build" One pic a week at least. Chassis made it's way home. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

09-09-2012, 04:57 PM	#16
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Crewcab "the rolling resume build" Good looking dually^^^. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

09-09-2012, 05:41 PM	#17
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Crewcab "the rolling resume build" sorr to hear of the stop order on the 4 door pickemuptruck.

09-20-2012, 10:25 AM	#19
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Crewcab "the rolling resume build" Are the cab dimensions going to be about the same as the square body crew cab? __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

09-21-2012, 06:04 PM	#21
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Crewcab "the rolling resume build" One more piece of the puzzle. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205



Register or Log In To remove these advertisements.

09-21-2012, 07:53 PM	#24
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Crewcab "the rolling resume build" hope to see progress real soon

09-23-2012, 01:26 AM	#25
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Crewcab "the rolling resume build" Well at this point it doesn't look like much, if not less. I have been extra meticulous on measurements. I also got the roof skin cut off. Now that I have the floor mapped out for what we want, I can build a frame inside to keep everything where I want it. I also stripped down the doors so I can start cutting them up. Once again, I may be going overboard on measurements. These are out of order, but They should be in here anyway. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

Register or Log In To remove these advertisements.