I have an issue with cab mounts
 

I guess I have the C20 cab mounts (first pic) I have cab I am sitting on a 4 wheel frame. So do I need regular C10 cab bushings (second pic) I am really confused on what to get now. When I got these this is what the vender said I needed. First pic. Any help would be great. Oh and it is just a 1/2 ton frame. And if they are supposed to the first pic, which ones go to the front of the cab.

Re: I have an issue with cab mounts
 

I am a little confused as to what you are exactly assembling together, in regards to what cab on what frame. It does sound like you need the 1/2T bushings though.

Are you putting a cab on a 1/2T 2wd frame?

Travis

Re: I have an issue with cab mounts
 

It is a 1972 4 wheel drive 1/2 ton frame that I am sitting a 1967 cab on it.

Re: I have an issue with cab mounts
 

A four wheel drive frame uses the mounts shown in the first set with the taller mounts. The front cab mounts are the on the right side of the picture second set.

Here is a picture of the front mounts installed.

Jim

Re: I have an issue with cab mounts
 

I guess i have my special helmet on, but you said i will need to use the first set of mounts shown with the taller mounts for the four wheel frame but then you said to use the smaller bushings in the second picture for the front of the cab. them are for a 2 wheel drive frame.
So do i use the short mounts in the first picture for the front and the taller ones on the back

Re: I have an issue with cab mounts
 

You need the first picture set for a 4X4

Re: I have an issue with cab mounts
 

Try this, it really helped me out.

http://67-72chevytrucks.com/vboard/s...&postcount=446

Re: I have an issue with cab mounts
 

Thanks for the replies i got the cab on but now the cab is riding on the transmission. sorry i opened another thread on this. sorry guys