The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 1.6 ratio rocker arms (https://67-72chevytrucks.com/vboard/showthread.php?t=537)

Frank_Zeller

03-27-2002 09:57 AM

1.6 ratio rocker arms

Any of you guys using 1.6 ratios stamped steel with or without the roller tip rocker arms? Any problems? What ones did you buy?

69 longhorn

03-27-2002 10:16 AM

I have run several sets of Comp cams Magnum roller tips,but a 1.52 ratio,& havent had any trouble. I have been told that if you are over .480 lift& heavy springs,the stock type stamped rockers are not the way to go. Good luck......69 longhorn.

Frank_Zeller

03-27-2002 10:19 AM

Just called comp cams........they said you have to relieve the push rod holes for clearance with the 1.6 ratio rocker arms..Darn

All times are GMT -4. The time now is 06:35 AM.