The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Has anyone put a 383 LT1 in a 65 GMC (https://67-72chevytrucks.com/vboard/showthread.php?t=540722)

Aaron Proctor 08-30-2012 03:50 AM

Has anyone put a 383 LT1 in a 65 GMC
 
I can get my hands on a LT1 fairly cheap, has anyone installed one of these in a 60's GMC? Any tips or info would help

Woogeroo 08-30-2012 04:24 AM

Re: Has anyone put a 383 LT1 in a 65 GMC
 
LT1 Burb put a LT1 in his 'burban.

I recall a handful of other fellas in here with LT1 fever as well.



-W

Aaron Proctor 09-02-2012 12:42 AM

Re: Has anyone put a 383 LT1 in a 65 GMC
 
thanks

LT1 Burb 09-02-2012 10:11 AM

Re: Has anyone put a 383 LT1 in a 65 GMC
 
just ask questions

1enick72 09-02-2012 01:25 PM

Re: Has anyone put a 383 LT1 in a 65 GMC
 
I am in process right now. Should have it in by next weekend. I will have a full write up in my build thread. Of course the engine is no biggie, it bolts like any other small block. Additional things you will need are;

Programmed PCM - remove VATs, EGR, etc and program for what is inside.
Harness - either stand alone or rewired factory harness
Fuel pump - high pressure fuel pump (45-50 psi) either in tank or external. To go with this you will need a return line to the tank also.


All times are GMT -4. The time now is 03:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com