The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)
-   -   Steering Box?? (https://67-72chevytrucks.com/vboard/showthread.php?t=542402)

karl 09-10-2012 12:51 AM

Steering Box??
 
1975 C10. Not sure if this is the correct place to post this but here goes. I was driving my truck today and noticed it has quite a bit of play in the steering. It has a power steering box. The truck has been sitting awhile and i finally got the transmission leak fixed and carb tuned. I was driving a more modern car with tight steering so it was most noticable. Is there another box or swap i can do to get rid of the slop and improve handling? Thanks.

oldspowered67C10 09-10-2012 03:02 AM

Re: Steering Box??
 
First make sure that the box you have isnt worn out. Alot of input shaft movement w/o alot of output shaft movement is a sign of a worn out box, they usually wear most where the steering is centered. If that checks out and all the other steering parts are OK you can change to a quick ratio steering box, itll give a faster steering response more like a modern car.


All times are GMT -4. The time now is 03:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com