Instrument bezel lens removal
 

I need to know how to get the lens out of my bezel, is there an esay way to do this?

Re: Instrument bezel lens removal
 

Nope, drop the steering column & pull the cluster.
Posted via Mobile Device

Re: Instrument bezel lens removal
 

I have the bezel out of the truck, I need to get the non tach lens out so I can change it for one with the tach lens. I should have been more clear sorry.

Re: Instrument bezel lens removal
 

Lay the dash system face down on a towel or a soft surface with the back facing upwards.
Take a 1/4" socket driver (or equivalent) and undo all the small outer screws holding the (silver-ish) back metal plate on. I think there is something like 8 of them and these screws are found on the outer perimeter edge of the plate...screwed into the plastic bezel.
Remove the main back (silver-ish) plate with all the inner guages 'stuck' (ie: mounted) to it.
then carefully remove the black main inner plate. This will expose the existing lens that you have nested inside the plastic bezel.
Carefully remove it and install your news lens (clean it very well....both sides first!!).
Reverse the procedure above and re-install in your dash.
Good Luck
Coley;)

Re: Instrument bezel lens removal
 

Thanks I'll give that a try.

Re: Instrument bezel lens removal
 

Coley, thanks for the info worked perfectly. Thats why I love this site.