The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Steering column rebuild (https://67-72chevytrucks.com/vboard/showthread.php?t=542556)

oakstcustomz

09-11-2012 02:00 AM

Steering column rebuild

I have searched this site, my factory manual, and the web and
Can't find a diagram or part numbers to rebuild my 1965 steering
Column! I want to keep it stock as much as possible! Please help y'all!
Posted via Mobile Device

oakstcustomz

09-14-2012 02:46 PM

Re: Steering column rebuild

No help? I'm not the only one!
Posted via Mobile Device

toddabrown

09-14-2012 10:40 PM

Re: Steering column rebuild

ive got problems with my 66 too. cant find many parts or rebuilt columns... taking my 3 on the tree out tomorrow and going with floor shifter.

GMC Jester

09-14-2012 11:15 PM

Re: Steering column rebuild

does the 3 on the tree bother you guys?

I've got 99 problems but a shift ain't one.

oakstcustomz

09-14-2012 11:36 PM

Re: Steering column rebuild

Quote:

Originally Posted by GMC Jester (Post 5593075)

does the 3 on the tree bother you guys?

I've got 99 problems but a shift ain't one.

Ha! I wish I had three pedals! My steering wheel does the
Samba when I turn! My 65 was a power glide stock but th po installed a
Th400
Posted via Mobile Device

oakstcustomz

11-13-2012 03:23 PM

Re: Steering column rebuild

So I found a 4 speed truck and got the pedals
and steering column before it was crushed.....
I bit the bullet and yarded my steering column
out and there is not much to it! Rag joint
Then a bolt through clamp bracket, spring, the lower
bearing wich is easy to replace and was the cause of my
problem in the first place
Posted via Mobile Device

All times are GMT -4. The time now is 12:40 PM.