The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)
-   -   What is this 1994 NV4500 worth? (https://67-72chevytrucks.com/vboard/showthread.php?t=543474)

jrsavoie 09-17-2012 03:07 PM

What is this 1994 NV4500 worth?
 
‎1994 GM NV4500 5 speed manual transmission from a K3500 6.5 diesel 4x4 Casting number C - 16812

Needs input shaft, input shaft bearing and 3rd gear synchro At the least.

I drove this transmission up til About September 2012. I pulled the NV4500 transmission because of the 3rd gear synchro not working after I had found a rebuilt unit.

I did not find out about the input shaft and bearing till after I pulled the transmission. The pilot bearing had gone out and chewed up the tip of the input shaft.

I swapped For a rebuilt.

It has the round shifter top and the 6.34 1st gear ratio.

The trans is from a diesel and has the balancer

I also have a rectangular shifter, spacer and shift lever/handle with knob. It is missing one of the 4 steel bushings that goes around the bolts through the spacer. This part will work on Dodge NV4500's also. What is the shifter worth?

Where would a good place to advertise these items be?

Hoods69BadBowTie 09-19-2012 09:30 PM

Re: What is this 1994 NV4500 worth?
 
I will gladly take them off your hands if you don't want them haha :D Not really sure what there worth. Just figured I would offer though.

jrsavoie 09-20-2012 01:05 AM

Re: What is this 1994 NV4500 worth?
 
Quote:

Originally Posted by Hoods69BadBowTie (Post 5601964)
I will gladly take them off your hands if you don't want them haha :D Not really sure what there worth. Just figured I would offer though.

Make that offer anywhere a neighborhood worth my while and you can be the happy owner. I think this trans would be an easy rebuild.

The input shaft was taken out by the pilot bearing and I'm sure that took out the input shaft bearing. That and the 3rd gear synchro shouldn't be to terrible.

I advertised the NV4500 for $400


All times are GMT -4. The time now is 05:33 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com