The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)

- - Camaro 10 Bolt (https://67-72chevytrucks.com/vboard/showthread.php?t=549118)

gregw98

10-25-2012 02:19 AM

Camaro 10 Bolt

I have a 79 Camaro 10 bolt rear end that I am putting in my 54. My original rear forward frame spring perches are wollowed out into oblong holes. Can I use the Camaro springs, which are a few inches longer. My concerns are that the springs will be too stiff or too weak. I value your opinions.

Mark3100

10-25-2012 08:07 PM

Re: Camaro 10 Bolt

i'm interested as well. I'm going to a salvage yard tomorrow morning to pick up my Camaro 10" posi. I'm putting it on a 49 C3100. I can't decide if I should go with a 4 link or leafs. I'm leaning more toward leafs. Any suggestions?

All times are GMT -4. The time now is 03:36 PM.