![]() |
Help Identifying Parts
I started the tear down on my 5.3 donor engine and I need help identifying two parts.
This one had nothing attached to it http://i76.photobucket.com/albums/j3...3/100_2777.jpg This is a hose that ran along the drivers side on top of the intake it was not connected to anything http://i76.photobucket.com/albums/j3...3/100_2778.jpg http://i76.photobucket.com/albums/j3...3/100_2779.jpg Thanks for the help |
Re: Help Identifying Parts
The plate above the oil filter covers openings into the block that can be used for oil cooler/radiator. You can tap that fitting for an oil pressure sensor or oil line to your stock oil pressure gauge.
The black plastic line is the EVAP line. I believe it comes from the tank/charcoal canister and pulls vapors into the intake manifold to be burned off. You can easily put a cap over the EVAP solenoid and delete it from your program/computer so that you don't have a MIL/Check Engine light coming on. |
All times are GMT -4. The time now is 05:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com