1986 and up tbi 700r4 dent cable installation
 

I have a 86 the first year of the tbi I had me trans 700r4 installed by Aamco. They had problems with getting the dent cable adjusted on the TBI they was asking me to change to a carb I refused I don't think it's shifting right wonder if anyone no and thing that's diffrent about putting this cable on a tbi over a carb the only thing I no now that should b simple is the throttle needs to be all the way open and the cable needs to be tight
Posted via Mobile Device

Re: 1986 and up tbi 700r4 dent cable installation
 

Might be time to switch shops, should be no reason anyone can't properly adjust detent cable on a 700r4 regardless if its a carb or tbi

Re: 1986 and up tbi 700r4 dent cable installation
 

First tell us the shift points. Does the cable bind anyway? Did they install a new cable with the 700R4? Is cable end adjustable? Detent cable is for a 350TH, TV cable for 700R4.

Set it this way: http://www.73-87.com/7387garage/drivetrain/tvcable.htm

Re: 1986 and up tbi 700r4 dent cable installation
 

AAMCO is the last place I would trust with a transmission job (or anything for that matter) as over the years my family members had nothing but bad rebuild jobs or incorrectly installed transmission. Learned from their mistakes

If you have original throttle bracket it should be attached to the intake and intake manifold to head bolts. It is critical to get 700R4 TV cable adjusted correctly. The most common problem is incorrect replacement cable. TV Cable adjustment procedure can be found here:

http://news.compperformance.com/Inst...ble_adjust.pdf

I had reasonable results using a universal replacement cable from TECKPAK - which can be found locally or on Ebay.

Since your truck was originally was equipped with TBI Aamco has no business telling you to switch to a carb. It is wrong for many reasons. A word of advise - leave that shop as quickly as possible.

//RF

Re: 1986 and up tbi 700r4 dent cable installation
 

86 should not have TBI.

Re: 1986 and up tbi 700r4 dent cable installation
 

It can if the original engine was a V6.

Re: 1986 and up tbi 700r4 dent cable installation
 

You sure? It always stuck in my head 87 was the first year for the trucks to have TBI no matter the engine size. Not doubting you on it just don't recall that.

Re: 1986 and up tbi 700r4 dent cable installation
 

I went threw this with Keith,a quote from him to me

To answer your earlier question: no TBIs on fullsize trucks in '85. We've had this discussion before and I can answer with confidence, because I 've had conversation with the GM Powertrain guys who did the calibrations for these TBI engines. They have said no TBIs until 1987 model year.

besides that I'd change shops TBI is much better to run then carb

Re: 1986 and up tbi 700r4 dent cable installation
 

Is why I'm fairly confident in my saying there was no TBI offered in full size trucks until 87. I know some GM cars and perhaps the S series had TBI/FI before 87, but not the full size trucks/SUV's.

Re: 1986 and up tbi 700r4 dent cable installation
 

I thought the v-6's were still carbed in 87.
I agree no tbi on trucks before 87.

Re: 1986 and up tbi 700r4 dent cable installation
 

4300 applications:
1985–2005 Chevrolet Astro/GMC Safari
1991–1993 GMC Syclone/GMC Typhoon (See LB4 below)
1988–1995 Chevrolet Blazer/GMC Jimmy
2001–2002 Chevrolet Express/GMC Savana
1988–2003 Chevrolet Silverado/Chevrolet S-10/GMC S-15
1994–2001 Oldsmobile Bravada
1985–2001 Chevrolet C/K

Re: 1986 and up tbi 700r4 dent cable installation
 

Here is a carbed 4.3 86 truck.
http://www.purplewave.com/cgi-bin/mn...090811/6650/13

Re: 1986 and up tbi 700r4 dent cable installation
 

GM history on V6.
Chevrolet kicked off a 75th anniversary celebration in 1986. By year’s end, the company would make 1,174,217 trucks. New was a high-tech instrument cluster. The Vortec V6 had electronic fuel-injection and swirl-port heads for a nine percent power boost. It was Chevy’s most powerful base truck engine ever
http://www.pickuptrucks.com/html/sto...art2page1.html

Re: 1986 and up tbi 700r4 dent cable installation
 

cars were first
mid size trucks, a friend had a mid jimmy with that 4.3...remember it being carbed tho

Re: 1986 and up tbi 700r4 dent cable installation
 

TBI did start coming out in full size trucks in 1986. The trucks were "1987" models though and not 86 year trucks. Just like the new body style 88 model trucks came out in 1987... They were still 1988 model trucks despite it being early 1987 still.

1987 year model trucks was when TBI was introduced to the full sizes.