The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   KS parting a 71 chevy big block truck (https://67-72chevytrucks.com/vboard/showthread.php?t=550278)

teeitup 11-02-2012 07:53 PM

parting a 71 chevy big block truck
 
5 Attachment(s)
Well what is left of it. It was pretty loaded at one time but some parts are gone. Take a look at all pics, I got it parted out today. Parts are in pics taken off and prices with them. Ask questions in thread. MONEY ORDERS ONLY. I'll hold part for a week and if I do not have money in my hand by that time I will offer it to next member, (I'm having a few members say they are sending money to me only to never send it lately)

BB motor towers are sold already

Thanks Randy

teeitup 11-02-2012 07:55 PM

Re: parting a 71 chevy big block truck
 
5 Attachment(s)
32

teeitup 11-02-2012 07:56 PM

Re: parting a 71 chevy big block truck
 
5 Attachment(s)
last pic turbo 400 gas pedal and kickdown switch with wire, its missing wire from firewall to tranny $56 shipped

teeitup 11-02-2012 07:57 PM

Re: parting a 71 chevy big block truck
 
5 Attachment(s)
1) ac outlets $36 shipped for all 3
2) gauge cluster $36 shipped
3) glove box door $28 shipped

teeitup 11-02-2012 07:58 PM

Re: parting a 71 chevy big block truck
 
5 Attachment(s)
1) misc parts
2) radio and speaker brackets $18 shipped
3) trico wipers $21 shipped
4) 4 core upper and lower holddowns $31 shipped
5) SWAY BAR $65 shipped

teeitup 11-02-2012 07:59 PM

Re: parting a 71 chevy big block truck
 
5 Attachment(s)
1) AT brake pedal $32 shipped
2) AC control, no broken ams $36 shipped
3) 4 BB AC compressor brackets
4) comp
5) AC boxes

teeitup 11-02-2012 08:00 PM

Re: parting a 71 chevy big block truck
 
5 Attachment(s)
1) PS Box $60 shipped
2) clutch delete plate $12 shipped
3) misc AC pieces
4) AC dash $125 shipped
5) BB high hump, some surface rust, no rot. $80 shipped, I have 2 of these out there

teeitup 11-02-2012 08:00 PM

Re: parting a 71 chevy big block truck
 
5 Attachment(s)
1) pic of surface rust on hump
2) heat shield for cab $21 shipped, I have 3 or 4 of these out there
3) seat belts
4) visors are faded some but good stiching
5) AT crossmember $50 shipped

teeitup 11-02-2012 08:01 PM

Re: parting a 71 chevy big block truck
 
5 Attachment(s)
1) turbo 400 shaft
2) another turbo 400 shaft, I have 2 or 3 others out there
3) PS pump setup $150 plus shipping
4) complete set of BB AC brackets $241 shipped
5) 2 piece ALT bracket set $81 shipped

teeitup 11-02-2012 08:02 PM

Re: parting a 71 chevy big block truck
 
2 Attachment(s)
1) 3 piece set of BB motor pullies for AC $81 shipped
2) turbo 400 AT linkage setup $45 shipped

weaintscared 11-02-2012 08:12 PM

Re: parting a 71 chevy big block truck
 
Looking for bed wells, do unhave them?
Posted via Mobile Device

teeitup 11-02-2012 08:18 PM

Re: parting a 71 chevy big block truck
 
Sorry no good ones

WIDESIDE72 11-02-2012 08:46 PM

Re: parting a 71 chevy big block truck
 
Randy, I am looking for the two brake lines that run from the prop valve down to the frame on a 72 1/2 ton 2wd
Posted via Mobile Device

teeitup 11-02-2012 09:01 PM

Re: parting a 71 chevy big block truck
 
Steve, sorry no 1/2 ton trucks right now, all are 3/4. Thanks Randy

teeitup 11-02-2012 09:02 PM

Re: parting a 71 chevy big block truck
 
Guys I also have a 71 C20 with tilt I'm going to be parting soon and a 71 3/4 4x4, that is in pieces, I sold the frame already off it.

teeitup 11-03-2012 02:07 AM

Re: parting a 71 chevy big block truck
 
Also a 72 K20 if I ever ger it here

Dave 11-03-2012 08:20 AM

Re: parting a 71 chevy big block truck
 
Randy,
I need the exhaust hangers that are rivoted to frame off this truck. I think there's a total of 6 for a '71 BB. Interested in the dash speaker out of this truck, if you have it. Also, do you have an extra BB AC rear adjusting brace that mounts to intake brkt then to the back of the compressor? LMK
Thanks Dave

burb71 11-03-2012 10:56 AM

Re: parting a 71 chevy big block truck
 
Did this one have a good original BB power steering hose?

too much stuff 11-03-2012 11:18 AM

Re: parting a 71 chevy big block truck
 
Price on the 4 ac brackets? Any 3/4 ton hubcaps for this or the other 3 coming in?
Thanks.

teeitup 11-03-2012 02:56 PM

Re: parting a 71 chevy big block truck
 
Dave, someone already got the hangers off it, sorry. The speaker in this truck was bad but I have other speakers out there. Sorry no extra AC brackets except these off this truck

burb71, Steve, sorry it didn't have on it


Too Much Stuff, Eric, $112 shipped for these 4. Sorry no good caps on the trucks I have coming in

Thanks Randy

Dave 11-03-2012 05:19 PM

Re: parting a 71 chevy big block truck
 
Quote:

Originally Posted by teeitup (Post 5683317)
Dave, someone already got the hangers off it, sorry. The speaker in this truck was bad but I have other speakers out there. Sorry no extra AC brackets except these off this truck

burb71, Steve, sorry it didn't have on it


Too Much Stuff, Eric, $112 shipped for these 4. Sorry no good caps on the trucks I have coming in

Thanks Randy

Randy,
Understood on the hangers and AC brkt. Looking for a core re: the spkr w/ brkts, lmk.
Thanks Dave.

decorl1 11-03-2012 05:38 PM

Re: parting a 71 chevy big block truck
 
Randy I'll take the clutch delete. Where to send MO? Thanks Denny
Posted via Mobile Device

BAT 11-03-2012 06:50 PM

Re: parting a 71 chevy big block truck
 
I am in need of the floor hump panel, how much and condition?

oldblue1968chevy 11-03-2012 07:56 PM

Re: parting a 71 chevy big block truck
 
Is that the larger sway bar? Is it 1 1/8" or 1 1/4"

Thanks

teeitup 11-03-2012 08:00 PM

Re: parting a 71 chevy big block truck
 
Dave, I have some speakers for sure

Denny, info sent

Bat, $80 shipped has some surface rust on right side see pics

oldblue, its the larger that originally came on these years 1 1/8. 1 1/4 never came on 67-72's

Thanks Randy


All times are GMT -4. The time now is 01:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com