KS parting a 71 chevy big block truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 11-02-2012, 07:53 PM

Well what is left of it. It was pretty loaded at one time but some parts are gone. Take a look at all pics, I got it parted out today. Parts are in pics taken off and prices with them. Ask questions in thread. MONEY ORDERS ONLY. I'll hold part for a week and if I do not have money in my hand by that time I will offer it to next member, (I'm having a few members say they are sending money to me only to never send it lately)

BB motor towers are sold already

Thanks Randy

teeitup · 11-02-2012, 07:55 PM

32

teeitup · 11-02-2012, 07:56 PM

last pic turbo 400 gas pedal and kickdown switch with wire, its missing wire from firewall to tranny $56 shipped

teeitup · 11-02-2012, 07:57 PM

1) ac outlets $36 shipped for all 3
2) gauge cluster $36 shipped
3) glove box door $28 shipped

teeitup · 11-02-2012, 07:58 PM

1) misc parts
2) radio and speaker brackets $18 shipped
3) trico wipers $21 shipped
4) 4 core upper and lower holddowns $31 shipped
5) SWAY BAR $65 shipped

teeitup · 11-02-2012, 07:59 PM

1) AT brake pedal $32 shipped
2) AC control, no broken ams $36 shipped
3) 4 BB AC compressor brackets
4) comp
5) AC boxes

teeitup · 11-02-2012, 08:00 PM

1) PS Box $60 shipped
2) clutch delete plate $12 shipped
3) misc AC pieces
4) AC dash $125 shipped
5) BB high hump, some surface rust, no rot. $80 shipped, I have 2 of these out there

teeitup · 11-02-2012, 08:00 PM

1) pic of surface rust on hump
2) heat shield for cab $21 shipped, I have 3 or 4 of these out there
3) seat belts
4) visors are faded some but good stiching
5) AT crossmember $50 shipped

teeitup · 11-02-2012, 08:01 PM

1) turbo 400 shaft
2) another turbo 400 shaft, I have 2 or 3 others out there
3) PS pump setup $150 plus shipping
4) complete set of BB AC brackets $241 shipped
5) 2 piece ALT bracket set $81 shipped

teeitup · 11-02-2012, 08:02 PM

1) 3 piece set of BB motor pullies for AC $81 shipped
2) turbo 400 AT linkage setup $45 shipped

weaintscared · 11-02-2012, 08:12 PM

Looking for bed wells, do unhave them?
Posted via Mobile Device

teeitup · 11-02-2012, 08:18 PM

Sorry no good ones

**WIDESIDE72** · 11-02-2012, 08:46 PM

Randy, I am looking for the two brake lines that run from the prop valve down to the frame on a 72 1/2 ton 2wd
Posted via Mobile Device

teeitup · 11-02-2012, 09:01 PM

Steve, sorry no 1/2 ton trucks right now, all are 3/4. Thanks Randy

teeitup · 11-02-2012, 09:02 PM

Guys I also have a 71 C20 with tilt I'm going to be parting soon and a 71 3/4 4x4, that is in pieces, I sold the frame already off it.

teeitup · 11-03-2012, 02:07 AM

Also a 72 K20 if I ever ger it here

**Dave** · 11-03-2012, 08:20 AM

Randy,
I need the exhaust hangers that are rivoted to frame off this truck. I think there's a total of 6 for a '71 BB. Interested in the dash speaker out of this truck, if you have it. Also, do you have an extra BB AC rear adjusting brace that mounts to intake brkt then to the back of the compressor? LMK
Thanks Dave

burb71 · 11-03-2012, 10:56 AM

Did this one have a good original BB power steering hose?

**too much stuff** · 11-03-2012, 11:18 AM

Price on the 4 ac brackets? Any 3/4 ton hubcaps for this or the other 3 coming in?
Thanks.

teeitup · 11-03-2012, 02:56 PM

Dave, someone already got the hangers off it, sorry. The speaker in this truck was bad but I have other speakers out there. Sorry no extra AC brackets except these off this truck

burb71, Steve, sorry it didn't have on it

Too Much Stuff, Eric, $112 shipped for these 4. Sorry no good caps on the trucks I have coming in

Thanks Randy

**Dave** · 11-03-2012, 05:19 PM

Quote:

Originally Posted by teeitup

Dave, someone already got the hangers off it, sorry. The speaker in this truck was bad but I have other speakers out there. Sorry no extra AC brackets except these off this truck

burb71, Steve, sorry it didn't have on it

Too Much Stuff, Eric, $112 shipped for these 4. Sorry no good caps on the trucks I have coming in

Thanks Randy

Randy,
Understood on the hangers and AC brkt. Looking for a core re: the spkr w/ brkts, lmk.
Thanks Dave.

decorl1 · 11-03-2012, 05:38 PM

Randy I'll take the clutch delete. Where to send MO? Thanks Denny
Posted via Mobile Device

*BAT* · 11-03-2012, 06:50 PM

I am in need of the floor hump panel, how much and condition?

oldblue1968chevy · 11-03-2012, 07:56 PM

Is that the larger sway bar? Is it 1 1/8" or 1 1/4"

Thanks

teeitup · 11-03-2012, 08:00 PM

Dave, I have some speakers for sure

Denny, info sent

Bat, $80 shipped has some surface rust on right side see pics

oldblue, its the larger that originally came on these years 1 1/8. 1 1/4 never came on 67-72's

Thanks Randy

11-02-2012, 07:53 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	parting a 71 chevy big block truck Well what is left of it. It was pretty loaded at one time but some parts are gone. Take a look at all pics, I got it parted out today. Parts are in pics taken off and prices with them. Ask questions in thread. MONEY ORDERS ONLY. I'll hold part for a week and if I do not have money in my hand by that time I will offer it to next member, (I'm having a few members say they are sending money to me only to never send it lately) BB motor towers are sold already Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 11-02-2012 at 08:15 PM.

11-02-2012, 07:55 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 chevy big block truck 32 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-02-2012, 07:56 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 chevy big block truck last pic turbo 400 gas pedal and kickdown switch with wire, its missing wire from firewall to tranny $56 shipped Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 11-02-2012 at 08:04 PM.

11-02-2012, 07:57 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 chevy big block truck 1) ac outlets $36 shipped for all 3 2) gauge cluster $36 shipped 3) glove box door $28 shipped Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 11-02-2012 at 08:05 PM.

11-02-2012, 07:58 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 chevy big block truck 1) misc parts 2) radio and speaker brackets $18 shipped 3) trico wipers $21 shipped 4) 4 core upper and lower holddowns $31 shipped 5) SWAY BAR $65 shipped Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 11-02-2012 at 08:07 PM.

11-02-2012, 07:59 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 chevy big block truck 1) AT brake pedal $32 shipped 2) AC control, no broken ams $36 shipped 3) 4 BB AC compressor brackets 4) comp 5) AC boxes Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 11-02-2012 at 08:09 PM.

11-02-2012, 08:00 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 chevy big block truck 1) PS Box $60 shipped 2) clutch delete plate $12 shipped 3) misc AC pieces 4) AC dash $125 shipped 5) BB high hump, some surface rust, no rot. $80 shipped, I have 2 of these out there Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 11-02-2012 at 08:10 PM.

11-02-2012, 08:01 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 chevy big block truck 1) turbo 400 shaft 2) another turbo 400 shaft, I have 2 or 3 others out there 3) PS pump setup $150 plus shipping 4) complete set of BB AC brackets $241 shipped 5) 2 piece ALT bracket set $81 shipped Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 11-02-2012 at 08:14 PM.

11-02-2012, 08:02 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 chevy big block truck 1) 3 piece set of BB motor pullies for AC $81 shipped 2) turbo 400 AT linkage setup $45 shipped Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 11-02-2012 at 08:15 PM.

11-02-2012, 08:12 PM	#11
weaintscared Registered User Join Date: Mar 2011 Location: Sumter SC Posts: 439	Re: parting a 71 chevy big block truck Looking for bed wells, do unhave them? Posted via Mobile Device

11-02-2012, 08:18 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 chevy big block truck Sorry no good ones __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-02-2012, 08:46 PM	#13
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: parting a 71 chevy big block truck Randy, I am looking for the two brake lines that run from the prop valve down to the frame on a 72 1/2 ton 2wd Posted via Mobile Device

11-02-2012, 09:01 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 chevy big block truck Steve, sorry no 1/2 ton trucks right now, all are 3/4. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-02-2012, 09:02 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 chevy big block truck Guys I also have a 71 C20 with tilt I'm going to be parting soon and a 71 3/4 4x4, that is in pieces, I sold the frame already off it. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-03-2012, 02:07 AM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 chevy big block truck Also a 72 K20 if I ever ger it here __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

11-03-2012, 08:20 AM	#17
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,397	Re: parting a 71 chevy big block truck Randy, I need the exhaust hangers that are rivoted to frame off this truck. I think there's a total of 6 for a '71 BB. Interested in the dash speaker out of this truck, if you have it. Also, do you have an extra BB AC rear adjusting brace that mounts to intake brkt then to the back of the compressor? LMK Thanks Dave

11-03-2012, 10:56 AM	#18
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: parting a 71 chevy big block truck Did this one have a good original BB power steering hose?

11-03-2012, 11:18 AM	#19
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: parting a 71 chevy big block truck Price on the 4 ac brackets? Any 3/4 ton hubcaps for this or the other 3 coming in? Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-03-2012, 02:56 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 chevy big block truck Dave, someone already got the hangers off it, sorry. The speaker in this truck was bad but I have other speakers out there. Sorry no extra AC brackets except these off this truck burb71, Steve, sorry it didn't have on it Too Much Stuff, Eric, $112 shipped for these 4. Sorry no good caps on the trucks I have coming in Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-03-2012, 05:38 PM	#22
decorl1 Registered User Join Date: Sep 2012 Location: State College, Pa Posts: 7	Re: parting a 71 chevy big block truck Randy I'll take the clutch delete. Where to send MO? Thanks Denny Posted via Mobile Device

11-03-2012, 06:50 PM	#23
BAT Account Suspended Join Date: Oct 2012 Location: Mt. Prospect IL Posts: 482	Re: parting a 71 chevy big block truck I am in need of the floor hump panel, how much and condition?

11-03-2012, 07:56 PM	#24
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: parting a 71 chevy big block truck Is that the larger sway bar? Is it 1 1/8" or 1 1/4" Thanks __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-03-2012, 08:00 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 71 chevy big block truck Dave, I have some speakers for sure Denny, info sent Bat, $80 shipped has some surface rust on right side see pics oldblue, its the larger that originally came on these years 1 1/8. 1 1/4 never came on 67-72's Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.