How much does it weigh?
 

There aren't any commercial scales close to me so I was hoping someone has done this already.

How much does a stock blazer weigh with a 350 in it?

And....how much does it weigh with a dana 60, 14 bolt rear and a 350 in it?

Just trying to get a close weight so I can get specs for a new cam.

Any help would be appreciated

Scott

Re: How much does it weigh?
 

I think I tipped the scales at 4600-4800
Posted via Mobile Device

Re: How much does it weigh?
 

So...with the heavy axles I can figure around 5k then.

About what I figured....thanks for the reply.

Re: How much does it weigh?
 

wow, amazing what a front diff and transfer case weigh. Mine comes in at 4000 (2wd with BB)

Re: How much does it weigh?
 

The 14 bolt he has is 500lbs bare. Weighs more than the small block.

Re: How much does it weigh?
 

Yeah, you really realize that if you ever have to drop a transfer case (like I did last month). :lol:

Re: How much does it weigh?
 

My 72 4x4 blazer with a 6.0 and 4L60E swapped in, 33" tires on aluminum wheels, AC, PS, PB, single wall top, and with 20 gallons of gas weighed 4,760 lbs.

Re: How much does it weigh?
 

ok.. I have the 6.0 but a 4L80e/NP205 combo, D60 and 14bff with 35's. No AC but double wall top... guess I'll be over the 5K mark.... I wonded what the weight of a GMC Denail is (where the motor came from) in comparison...

Re: How much does it weigh?
 

I have a 1991 Suburban that has all the things on your list and it weighs in at about 3 tons empty. I'm thinking you almost have more weight in what you added than what's original. I'd say you are probably close to the weight of a Denali XL. The top on the old Blazers is probably heavier than an equivalent permanent steel top and air con is only a few hundred pounds if original, vintage air probably half that.

So yea I'd say you'd easily be at 5K or so.

Re: How much does it weigh?
 

Only way to know for sure is to stick it on a scale and see. Most every town has one, scrap yards especially. Slip a guy $20 and he'll let you pull it on there for a minute, that's what I do ;)