The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Door check problems (https://67-72chevytrucks.com/vboard/showthread.php?t=552301)

melhilburn 11-17-2012 06:47 PM

Door check problems
 
Need to replace the driver side door check - how much of the door do you disassemble to get the job done?? - Just want to make sure I'm headed in the right direction.

MusicMan70 11-17-2012 06:58 PM

Re: Door check problems
 
Door check this; then stand back and say, "Would you look at that!"

http://www.persh.org/pickup/DoorChecks.htm

donthekawguy 11-18-2012 12:27 AM

Re: Door check problems
 
I just did my passenger side about a week ago. Take off the handles, panel roll the window up and you should be able to reach in to replace it. The hardest part is getting the screws started that hold it to the door.

chevy_mike 11-18-2012 02:01 AM

Re: Door check problems
 
My '65 I pulled the door panel and handles. Remove the pin and two screws. Replace with new one. I used the Jeep Cherokee front 4 door ones. This prevents the doors from opening too far and gives me two "stops" to hold the door open. Works great! Took me about 5 minutes per side.

melhilburn 11-18-2012 05:24 PM

Re: Door check problems
 
This is fantastic! - thanks for all the help.


All times are GMT -4. The time now is 11:17 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com