The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)

- - Anyone running rim adapters? (https://67-72chevytrucks.com/vboard/showthread.php?t=552439)

Chevy350V8

11-18-2012 03:34 PM

Anyone running rim adapters?

I want to run my 16' zq8s but there for s10s, anyone ever use rim adapters?
Posted via Mobile Device

jb1016

11-18-2012 09:27 PM

Re: Anyone running rim adapters?

I know it's doable -- I've seen a 454ss on Corvette wheels before, which is the same 5x4.75 bolt pattern as an S10.

Chevy350V8

11-18-2012 10:42 PM

Re: Anyone running rim adapters?

How far they stick out? That's what I'm worried about
Posted via Mobile Device

jb1016

11-20-2012 09:40 PM

Re: Anyone running rim adapters?

1 Attachment(s)

Corvette wheels look good...but I'm not sure if there are backspacing differences between vette and S10.

Attachment 1015226

YBNORML

11-23-2012 08:07 PM

Re: Anyone running rim adapters?

2 Attachment(s)

I have done this before. I took a set of 20" Boss wheels from my 4-door Blazer and put them on my 98 X-cab. I used 1" adapters. If I was to do it again I would use 1-1/4" adapters. In oder to run the 1" adapters I had to trim the stud length. Something I did not want to do, but I already had the adapters. Unfortunately I no longer have the 98 so I can't help you with offset/backspacing questions.

All times are GMT -4. The time now is 07:49 PM.