Parting 71 LWB C10 BB 2WD
 

So things have changed again, and I have decided that instead of installing the BB in my 67 I am going to go the LS route eventually so I am parting this entire truck to try and put some money towards the motor that I want in the 67.

Truck is a factory BB truck with Air Conditioning...

The truck no longer has a bed or drivers side door on it...

So for starters I will post a few prices so as to keep inline with the rules... If you see something you need let me know and we can work something out. All prices are plus shipping and of course are always "or best offer", would rather not ship the big stuff but again we can work something out if need be...

402 BB - $700 no carb
TH400 w/yoke - $350
front 5 lug disc brake suspension - $150
Power steering Gearbox - $75
Power brake booster w/Master Cylinder and Prop valve - $50
cab w/title - $100 (needs outer rockers at a minimum most likely inners too)
5 lug rear axle - $150 (I dont know the ratio but will look into that tonight)
fiberglass rollpan for fleetside bed - $25

if you need better pics of anything just let me know...

Attachment 1015010

Attachment 1015011

Re: Parting 71 LWB C10 BB 2WD
 

Exhaust brackets that mount to the frame? Heat shield on pass side firewall? Trans linkage w/frame bracket and mount to tranny? Steering column? Frame brackets, clamshells, and rubber for engine?
Posted via Mobile Device

Re: Parting 71 LWB C10 BB 2WD
 

2nd for the exhaust brackets, complete 2 pc driveshaft
Posted via Mobile Device

Re: Parting 71 LWB C10 BB 2WD
 

prices on each of the following shipped to 58265.
-spark plug heat shields
-oil pressure line (from block to guage)
-power steering brackets, remote resivoir and hoses.
-crank, water pump, p/s pulleys
-Alternator brackets
-fan shroud
-rear sport bumper brackets
-passenger floor heat shield
Thanks, Brett.

Re: Parting 71 LWB C10 BB 2WD
 

Exhaust brackets that mount to the frame? Going to have to look to see if they are still there. The PO added aftermarket duals on this truck so not sure if they are still there
Heat shield on pass side firewall? will look tonight to see if it is in good shape, take pics for you and then we can discuss
Trans linkage w/frame bracket and mount to tranny? would like to leave with the transmission if trans doesnt sell soon then you will be first inline
Steering column? Non-Tilt Automatic in good shape will get some pics tonight for you I will take $40 plus the ride
Frame brackets, clamshells, and rubber for engine? Would like to leave with the engine for now, if engine doesnt sell soon then you will be first in line for them

Re: Parting 71 LWB C10 BB 2WD
 

Re: Parting 71 LWB C10 BB 2WD
 

Re: Parting 71 LWB C10 BB 2WD
 

If that rear end is a 12 bolt posi and you would be willing to put it on a skid, I would be interested in it. Also, any pics of the Brake Booster, etc.?

Re: Parting 71 LWB C10 BB 2WD
 

Re: Parting 71 LWB C10 BB 2WD
 

We would give $100.00 shipped for the big block frame stands if no one has laid claim to them yet Thanks, Fred

Re: Parting 71 LWB C10 BB 2WD
 

Sorry, just read this whole post. Did not mean to cut in on anyone's deal...

Re: Parting 71 LWB C10 BB 2WD
 

Here are some more pics and some that were requested...

Power Brake Booster
Attachment 1015081

Steering Column, someone messed with the turn signal lever... should be an easy fix, but works as is...
Attachment 1015082

An original AM radio not sure of condition will attempt to see if it works later today $15 + shipping
Attachment 1015083

Rear side of AM radio
Attachment 1015084

The hangers are already gone or destroyed by the PO... Here is a shot of the rear of the frame
Attachment 1015085

More to come as I can get to it...

Re: Parting 71 LWB C10 BB 2WD
 

Any chance the small exhaust bracket on the pass side frame rail located just behind the trans xmember is still there?

Also are you interested in shipping the complete driveshaft, front and rear shafts with carrier bearing and xmember mount.

Re: Parting 71 LWB C10 BB 2WD
 

Re: Parting 71 LWB C10 BB 2WD
 

2nd on the exhaust brackets to(VA72C10), 1st on the driveshaft.

The shaft can be slipped apart at the splined slip joint.(JUST MARK BOTH SIDES FOR INDEX PRIOR TO REMOVAL). Should keep shipping reasonable.

I also see you listed the 400 yoke w the trans, I will need it.

LMK, thx, D'

Re: Parting 71 LWB C10 BB 2WD
 

Re: Parting 71 LWB C10 BB 2WD
 

I can pick the rear end up in person if its avail and 3.08
Posted via Mobile Device

Re: Parting 71 LWB C10 BB 2WD
 

How much for the center link with tie rods shipped to 95240 business addy?

Re: Parting 71 LWB C10 BB 2WD
 

Re: Parting 71 LWB C10 BB 2WD
 

interested in what is on the interior. How is the AC setup?

BTW, OOH RAH and happy belated birthday

Re: Parting 71 LWB C10 BB 2WD
 

Re: Parting 71 LWB C10 BB 2WD
 

depending on condition, I'd be interested in the whole A/c lot minus the metal dash and the compressor.

Interior wise, I'm interested in the A/c vents and controls. If you were local, I'd snag that seat from ya too, but shipping would kill me

Re: Parting 71 LWB C10 BB 2WD
 

Second in line for rear sport bumper brackets,how much shipped to 33315.thanks Brian
Posted via Mobile Device

Re: Parting 71 LWB C10 BB 2WD
 

still interested and can pick up this weekend but need to know the ratio, dont need the same as i have. thanx

Re: Parting 71 LWB C10 BB 2WD
 

Gentleman, I will get pics and prices up today for those that have asked about parts.