The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - CA Pinion angle shims, bumpstops (https://67-72chevytrucks.com/vboard/showthread.php?t=553119)

leddzepp

11-23-2012 12:43 AM

Pinion angle shims, bumpstops

1 Attachment(s)

Here is a set of 5 degree pinion angle shims for lowered trucks. They will also lower your truck an additional 1/2 inch. Included is a set of bumpstops that can be used inside of a c-notch, or bottom of the frame rail if not running a c-notch. $40 Shipped in the USA for all.
Posted via Mobile Device
Posted via Mobile Device

leddzepp

11-25-2012 10:51 PM

Re: Pinion angle shims, bumpstops

Bump.
Posted via Mobile Device

budnikguy

11-25-2012 11:23 PM

Re: Pinion angle shims, bumpstops

Hey man, how much picked up?!
Posted via Mobile Device

HotRod C/10

11-25-2012 11:27 PM

Re: Pinion angle shims, bumpstops

Are these for coil spring trucks?

leddzepp

11-26-2012 12:30 AM

Re: Pinion angle shims, bumpstops

Quote:

Originally Posted by budnikguy (Post 5722971)

Hey man, how much picked up?!
Posted via Mobile Device

.

Adam- ill do $30 picked up.

Quote:

Originally Posted by HotRod C/10 (Post 5722979)

Are these for coil spring trucks?

They will work for both I believe. I had them on a coil sprung truck, but I think they will work for a leaf sprung truck, as the hole in the center would allow it to be centered on the pin used in leaf springs.
Posted via Mobile Device

budnikguy

11-26-2012 01:18 AM

Re: Pinion angle shims, bumpstops

COOL, pm me your # and I will make time to stop by!

All times are GMT -4. The time now is 01:59 AM.